By enabling the home control network to extend beyond the home and allowing service providers to offer value-add services to leverage the in-home network, many new things become possible. First, the cost of the in-home network will begin to be insignificant, as it has happened to cellular phones and cable TV set-top boxes.
I started to investigate the best way to interface X-10 to the outside world and have found the micro controller chip to be the best solution, since not only the X-10 connectivity could be addressed by the micro controller, but also the logic of the project itself, resulting in a device with very few parts.
The software development must first begin by deciding how to implement the CEBus/Home Plug & PlayTM protocol stack. Two options exist here: the developer can either write the stack themselves, which is a long and arduous process taking several man-years, or purchase a tool that integrates the protocol stack with their code.
Paul Motz is a businessman and former newspaper publisher from Kitchener, Ontario, Canada. He has been using X-10 technology for over 15 years and is an avid Macintosh user. He currently uses a B&W G3 and a Powerbook 2400 with a G3 upgrade.
Typically, crimp-on connectors are for stranded cable, and one of the biggest mistakes people make is using the wrong crimp-on end. If you look very closely, you will see a row of 'teeth' on the underside of the exposed pins. These teeth pierce the insulation of the cable to make electrical contact with the copper wire. Using a crimp-on connector designed for a solid cable on a stranded cable can result in an unreliable connection (and vice-versa).
Part of a series on Complex Control with the Smart Housekeeper. Using the Smart Housekeeper and wireless technology to optimize the effectivity and adjust your sprinkler system.
TouchLinc from SmartLinc is one of the more affordable pads on the market for controlling a home automation system and I found it quite easy to set up. If your X-10 controller is capable of IR and Hardwired control etc. then the TouchLinc should be able to control A/V systems as well as most of the other equipment in your home.
In more complex installations, a capacitor across the two legs will both help and hurt.
Using WSH and the Slinkx control, I was able to map a single button on my X10 RF remote to gradually dim all the lights in my living room, turn off the aquarium pump (loud!), turn on the TV, receiver, and DVD player, and set the inputs on the TV and reciver, and finally open the DVD tray. Watching a DVD became as easy as slapping a disc in and hitting play.
MisterHouse is the name of the open source program I wrote to do Home Automation (HA) chores at our house. It runs on Windows 95,98, NT, or any POSIX enabled Unix, like Linux. It can interact with a variety of serial port devices, including the X10 CM11 interface.
For example, you can sit back in your chair and click one button on your remote to open your web browser. Now relax and navigate around using the remote to scroll etc. This unit would be good for remote operation while giving a presentation with PowerPoint as well.
Many who use X-10 for lighting control have been awaiting the "Two Way" switch for some time now. Why? The main reason is because while you may have a sophisticated controller that monitors the powerline for commands and keeps track of lighting status from that data ... there has not been a method of keeping track of light levels or status if someone actually uses the manual switch to change them. In other words ... the switches didn't send the X-10 code when someone pushed the button ... they just dimmed the light or turned it on or off.
The Programmable Logic Controller (PLC) is a computer which can do timing functions. The timer instruction can be used to time events or create delays in residential applications. An example of a timer function is in the control of the garage light; on when the garage door is open and off 5 minutes after the door is closed.
Max sent me some photos to go along with the ongoing saga of this interesting project. I've added pics here so you can reread the letters (reprinted from last month) and see the photos. Max will be returning to China to complete the project in April and has promised to update us of the progress.
Recently, the growth in the number of home automation standards has made integrating products from different manufactures and network protocols difficult if not virtually impossible. Home API will provide a common layer of functionality above present and future network protocols, lessening integration problems.
Records 2266 to 2280 of 2407
Automation & Control - Featured Product
The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. â€˘ 120k or 248k Flash (8k or 16k RAM) memory â€˘ 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. â€˘ Reduced current consumption and improved receiver sensitivity and output power â€˘ Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection