In this edition of the Hometoys.com e-magazine I am going to take you through the basic steps from cabling and hardware to installing your own basic wired home network.
The following three examples are simple home solutions that can be implemented in nearly any home on nearly any budget, using equipment available from X10.com.
This project is to address a major problem faced by many Home Automators, who are looking for a more intelligent way to monitor the status of their equipment throughout the home. To find out more on the Probe Zone Hardware Solution, visit the Probe Zone Website.
"Another remote control in the bedroom is built into a custom console mounted on the under side of the headboard. The entire console is illuminated with glowing LEDs for use in the dark. In addition to the X-10 control, there is a clock, security control panel, and an indoor/outdoor thermometer."
Records 16 to 19 of 19
RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.