TrackNet Launches Tabs™ IoT Home and Family Monitoring Solution for Busy Families

The Tabs hub provides Wi-Fi coverage over an entire residence and Tabs sensor coverage over entire neighborhoods with significant benefits not only to consumers but also to operators and service providers deploying Low Power Wide Area Networks (LPWAN). For operators and service providers, the Tabs hub installed within customers' homes accelerates and scales LPWAN deployments much faster than a solely tower-based approach, easily provides deep indoor coverage and significantly reduces the network deployment capital and operation expense. 
Each Tabs solution starts with a wireless hub, which provides the Tabs sensor coverage over an entire neighborhood or high-rise development, delivering immediate benefit to the consumer. Each solution further includes a Tabs extender, which is a Tabs sensor hub but not a full Wi-Fi router, to ensure coverage over the locations most frequented by families such as school, day-care, or a friend's house. 
As more users install Tabs hubs and extenders, they collaborate to build or improve network coverage over an entire city or region, giving the users additional benefit for locating children, pets, elderly or things.   Full Press Release:  

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.