SystemMax AVL Upgrades Church of the Saviour UMC With Martin Audio

Cincinnati's Church of the Saviour United Methodist Church recently underwent an audio upgrade by SystemMax AVL with Martin Audio CDD speakers and CSX subs.

Cincinnati, OH--SystemMax AVL was originally brought in to the Church of the Saviour United Methodist Church as consultants for a needs assessment and design working with local contractors, and they ended up doing an audio upgrade and theatrical lighting installation.

As SystemMax's Darryl Johnson explains, "We ended up redesigning and installing the audio system for the worship space which is now doing split services with contemporary Christian worship and electric bands as well as traditional services with organ and choir.

"The room had severe acoustic anomalies so we brought in an acoustic consultant, Haverstick Designs from Indianapolis, to do room measurements and recommend treatment for the space to bring it within viable parameters, and then we installed a Martin Audio CDD/CSX speaker system with Elation pro lighting."

Max Maxwell, Johnson's partner adds, "Church of the Saviour is in a modern structure built in the late eighties, early nineties and the worship area had a lot of drywall and 60% of the back wall is glass with a large stained-glass window in the wall behind the platform, all of which created a four or five second decay. The glass is particularly challenging because there isn't a way to treat that.

"Based on the consultant's recommendation, we put in ProSoCoustic 2-inch wall panels in different lengths and sizes on the side walls specifically sized to the areas where they were being used. With the treatments, we were able to get the decay time down to less than two seconds."

The Martin Audio system included CDD12 and CDD8 speakers in tandem with CSX212 subs. "The way the structure is built," Darryl points out, "there was no place to ground-stack the subs or build them into the stage so we flew two left and right with one of the CDD12's in the center section of the room that has a higher ceiling. Then we flew a CDD12 on the outside right and left of the room which has a lower ceiling. In the rear of the church, there's a delay ring of three CDD8's across the upper and lower portions of the ceiling. Luckily, the space is wide enough to rig all the speakers across the church."

Asked about the system's performance, Max responds, "it sounds phenomenal. We used a matched pair of Earthworks choir microphones and the CDD speakers clearly reproduced all the clarity and quality those mics offer. The church uses a Roland electronic drum kit and all the drums are perfectly reproduced through the system with significant bass response.

"And even though Darryl and I are musicians, the main thing we're focused on is clarity and articulation for the sermons which is critically important. If the pastor speaks and no one understands what she's saying, we've pretty much missed the boat.

"We felt that because of the CDD's pattern control, wide dispersion and the way the high frequency drivers function, it was the most appropriate choice for the install and it turned out great. Speech intelligibility with the CDD's is amazing," Max concludes, "and when you factor in the CSX subs, music reproduction is everything we could have hoped for. Our client is ecstatic with the system. The install has been a major success and we've gotten other jobs because of how great it sounds."

Featured Product

 BLE2 Series Brushless Motor & Driver

BLE2 Series Brushless Motor & Driver

The BLE2 Series replaces our popular BLE Series and continues our brushless motor advantages by featuring an all new compact, high-power and high-efficiency brushless DC motor combined with a Driver that can be digitally set and controlled via external DC voltage or by the front panel. The BLE2 Series can easily compete with larger 3-phase inverter driven motors in many more applications, with built-in simple holding torque function, saving space and increasing performance thanks to the advantages of a brushless motor design. The BLE2 Series has a maximum speed of 4000 r/min, achieving a speed ratio of 1:50 (80 to 4000 r/min). The new motor structure is small than previous models and enables high power and high efficiency while incorporating easy setting, installation and wiring. The new motor connector offers IP66 degree of protection and allows for easy and direct connection between motor and driver with two available orientation of cable outlet direction.