KanexPro Releases Cost-effective 4K Compliant HDBaseT™ Extender

KanexPro is proud to release a cost-effective, installer friendly version to its family of HDBaseT extender line-up. Introducing the EXT-HDBASE70E, it's a transmitter-receiver set designed to extend uncompressed HDMI video and multi-channel audio with bi-directional control signals up to 230 feet.

It is powered over Ethernet thus; it includes one locking power supply for the sender side. Supports full 4K@30Hz, 1920x1200 and pure 1080p/60 resolutions. The Extender is HDCP compliant and supports requirements for EDID management and CEC protocols.


Ideally designed for markets serving Digital Signage, Classroom Tech and house of worship centers where there is a critical need to send Ultra HD 4K resolutions & digital audio over cat6 using shielded twisted pair cable.

For more info, please visit: www.kanexpro.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.