Accell Introduces UltraAV DisplayPort 1.2 MST Multi-Display Hubs for Extended Display Viewing

The UltraAV DisplayPort 1.2 MST Multi-Display Hubs allow users to mirror or extend their desktop over three displays, ideal for gaming, graphics design or increased productivity

FREMONT, Calif.--Accell, a leading provider of quality computer, home theater and mobile device accessories, today announced the unveiling of its new UltraAV DisplayPort and Mini DisplayPort 1.2 MST Multi-Display Hubs. With an MSRP of $129.99, Accell's hubs provide additional viewing of up to three DisplayPort monitors from a single DisplayPort or Mini DisplayPort video output and are available now.


Accell's new DisplayPort and Mini DisplayPort hubs utilize the new multi-stream transport (MST) protocol, supporting up to three displays independently at up to 2560X1600 at 60Hz, each with DP 1.2 or up to HD 1080p with DP 1.1 single-stream transport (SST).

The Accell UltraAV MST Multi-DisplayPort hub supports non-DisplayPort outputs, including VGA, DVI or HDMI. The MST Multi-DisplayPort hub is DP++ and can actively convert the DisplayPort signal to other display interface signals using optional passive or active adapters.

Accell's UltraAV DisplayPort 1.2 MST Multi-Display Hubs feature the following:

*Works on DisplayPort (or Mini DisplayPort) enabled Windows or Macintosh computers

*Utilizes new Multi-Transport (MST) protocols

*Supports up to three displays in MST or SST mode

*Use two hubs to support a six display array

*Supports 4K Ultra HD when using DisplayPort 1.2

*Compatible with DVI and HDMI using optional adapters

*Compliant with DisplayPort 1.1a and 1.2 specifications

*Up to 5.4bps/lane link rate for a bandwidth of 21.6 Gbps

For more information about Accell and the company's various products, please visit http://www.accellcables.com.

About Accell

Accell Corporation is focused on the design, manufacture and delivery of affordable, high quality accessories for the audio/video, mobile device and computer markets. Accell produces high quality and innovative products by combining the low cost benefits of a global manufacturer and the design capabilities of a Silicon Valley based engineering and marketing team. Accell is a member of CEDIA and CEA. For more information, please visit our Web site at http://www.accellcables.com, follow us on Twitter at @AccellCables or on Facebook.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.