MuxLab Launches HDMI over Coax Extender Kit

Connect HDMI sources and displays one coax cable

MONTREAL, QUEBEC - MuxLab Inc. is pleased to announce the launch of the newest addition to its HDMI line of products; the HDMI over Coax Extender Kit (500465, 500465-RX). This HDMI Extender allows an HDMI source to be connected to an HDMI receiver up to 250 ft (76 m) at 1080p resolution via one coax cable in a point-to-point configuration.


This new Extender provides a solution for various applications such as digital signage, industrial and commercial AV systems, classroom projector systems, boardroom systems and medical information systems.

"This Extender can be cascaded via the Receiver (500465-RX) in order to support multi-display applications" said Marc Bohbot, MuxLab's Director of R&D. "This allows for a wide variety of applications and uses for this new member of our HDMI family".

Some additional features of the 500465 include its ability to support up to 500 ft. (152m) at 1080i/720p resolution and its durable build which makes it ideal for harsh electrical environments.
The transmitter converts HDMI to SDI while the receiver converts SDI back to HDMI. The Extender is cascadable on both the transmitter (TX) and receiver (RX) sides.

About MuxLab
MuxLab Inc. is a leading designer and manufacturer of connectivity solutions that allow CCTV and Audio-Video equipment to be connected via cost-efficient Cat5e/6 copper twisted pair in the structured cabling environment. For over 25 years, the MuxLab brand has been synonymous with quality, performance and reliability. MuxLab solutions streamline cabling by reducing material, space and installation costs. Even after installation, MuxLab products help save time and money by facilitating moves, adds, and changes.

###

For more information;
www.muxlab.com
videoease@muxlab.com
514-905-0588

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseTâ„¢ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.