AURORA MULTIMEDIA ANNOUNCES HDMI/VGA WALLPLATE WITH HDBaseT CAT EXTENSION:

- Aurora Multimedia's new DXW-2 incorporates the latest in HDBaseT HDMI Extenders offering a 2-gang wall-plate with 1-HDMI, 1-VGA/YPbPr 2-Audio L/R input Ethernet and USB Pass Thru.

MORGANVILLE, NJ, June 12, 2013 (Booth 3159) - Aurora Multimedia, a leader in IP control systems and HD video distribution, introduces One Room - One Cable™ solution-based products with its new DXW-2 Audio/Video Wall Plate for classroom and conference room applications. The DXW-2 accepts a single HDMI/DVI input and 1-VGA/YPbPr input each with its own analog audio input. The two inputs are selectable via the front plate, auto-detect or via RS232 and passed over a single CAT cable up to 600ft (182m) using the latest HDBaseT technology. The new wall plates do not require a power supply.


The DXW-2's audio inputs are all embedded with their associated video signals and passed as 1080P HDMI over a single CAT5e/6a cable to the mating DXE Receiver module, DXM Matrix switcher CAT inputs or any other HDBaseT authorized product. The DXW-2 family all fit into standard Dual-gang Decora® plates and with only 1.4" depth, fits into most floor and table boxes as well. VGA signals are converted to 1080P HDMI directly at the wall plate and HDMI inputs accept DVI as well. On-board IR receiver and embedded serial control allow simple far-end display control over the same CAT-X cable. Three different models offer options with Ethernet and USB 2.0 extension as well allowing for remote use of interactive white-boards, camera's and other USB 2.0 devices.

Made in the USA, the DXW-2's are available in both Black and White in three different versions (DXW-2, 2E & 2EU). DXW-2 & DXW-2E models shipping now. For further information, please visit www.auroramultimedia.com.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.