Platinum Tools

AURORA MULTIMEDIA ANNOUNCES Digital Xtreme 2nd Generation Card-Based HD Video Matrix:

- Aurora Multimedia's new DXM G2 HD matrix switchers come in three frame sizes: DXM-88, DXM-1616 and DXM-3232.

MORGANVILLE, NJ, June 12, 2013 (Booth 9-C125) - Aurora Multimedia, a leader in IP control systems and HD video distribution, announces its new 2nd generation Digital Xtreme Matrix (DXM) switchers now with HDBaseT CAT I/O cards offering 1080P 60Hz transmission over single CAT cable up to 600ft. Units are available in three Card Cage sizes; 8x8, 16x16 and 32x32 allowing for flexible/scalable configurations. All units offer auto EDID learning and management for ease of setup. Associated HDBaseT Tx and Rx modules are remotely powered by the DXM units over the single CAT cable. The new units also offer flexible RS232 and IR signal routing to individual outputs or to all outputs simultaneously for unprecedented display control.


With a full assortment of Input cards no format is left behind with crystal clear digital conversion to 1920 x 1080 60Hz. Cards are available in HDMI, HDBaseT-CAT, VGA/YPbPr, HD-SDI and Fiber. Output cards are available in HDMI, HDBaseT-CAT, SDI and VGA. The HDBaseT I/O cards are fully compatible with Aurora's family of DXE-CAT products and new DXW Wall Plates. The DXM-Series is available and shipping now. For further information, please visit www.auroramultimedia.com.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.