Kramer Introduces the VS'808TP 8X8 Twisted Pair Matrix Switcher

The VS'808TP is designed to work with the auto'adjusting TP'133/TP'134 transmitter/receiver pair, allowing direct connection of the signals over differing cable lengths

Kramer Electronics is pleased to introduce the high'performance VS'808TP 8X8 Twisted Pair Matrix Switcher for analog twisted pair signals.

The VS'808TP features eight inputs and eight outputs for remote connection with compatible TP transmitters and receivers. The switcher is designed to work with the auto'adjusting TP'133/TP'134 transmitter/receiver pair. An additional, switchable VGA, stereo audio and RS'232 local input (built'in transmitter) and output (built'in receiver) allows direct connection of the signals (analog video up to WUXGA, audio and RS'232) with these compatible units. The VS'808TP also includes audio'follow'video or breakaway switching for audio signals and 15 user'programmable presets for quick'change configurations.

The VS'808TP is designed especially for presentation and multimedia installations where a high level of control possibilities are required from extended distances. It utilizes economical TP (Twisted Pair) cabling, which is commonly pre'installed in buildings, schools, hospitals, etc. The unit routes and distributes signals both from a local and/or remote source, at extended ranges of up to 200m (656ft). Kramer recommends using Kramer BC'DGKat524, BC'DGKat623 and BC'DGKat7a23 cables for optimum range and performance.

Using Kramer's TP'133 and TP'134 transmitter/receiver pair with a standard CAT'5 cable automatically makes the system equalize and de-skew the signal for different cable lengths.

The two'line LCD display of the VS'808TP shows separate routing information of video, audio or RS'232 signals. The unit is controlled via its front panel buttons, RS'232, RS'485 and Ethernet.

The VS'808TP is a standard 1U 19" rack mount size and comes with included rack "ears."

The VS'808TP is currently in stock and available from Kramer Electronics sales companies around the world.

For more information about Kramer Electronics please visit

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.