HoverPro is a single LCD monitor suspension device that allows you to deliver visual messages and content anywhere and without the limitations of wall mounting and/or expensive kiosks.
LAS VEGAS, FEBRUARY 19, 2013 - Adaptive Video Walls and Displays, a division of Adaptive Technologies Group and the premier provider of innovative wall-mountable, floor-standing, interlocking and flyable video wall frames for multiple LCD, LED and plasma monitors, will showcase its HoverPro® single LCD monitor suspension device at Digital Signage Expo 2013 (DSE 2013, Booth 1715).
"Adaptive Technologies Group is known for its large fixed and flyable video walls so HoverPro is the ideal product to showcase at DSE, as it is a secure, reliable solution for single LCD monitor suspensions," says Paul Allen, president, Adaptive Technologies Group. "In the world of digital signage, putting your message in front of the audience is key. HoverPro suspends any size video monitors anywhere inside a facility right in front of the target audience in hallways, doorways and checkout lines. Whether the HoverPro suspension is used in a permanent store location or for a trade show exhibit, Adaptive strives to offer the latest solutions with reliability and safety as its cornerstone."
HoverPro is a single LCD monitor suspension device that allows you to deliver visual messages and content anywhere and without the limitations of wall mounting and/or expensive kiosks. Messages are permanently displayed above and in front of indoor target audiences by suspending and aiming large LCD and plasma screens (over 40 inches) from any overhead structure. As a pre-engineered rigging system, HoverPro adapts to the standard rear VESA-mounting hole patterns built into flat screen monitors to be safely rigged in portrait and landscape orientations.
These rigging kits provide installers with the ability to safely suspend and tilt screens into a wide range of viewing angles, from any location and distance from the roof. Down-tilt aiming is accomplished by way of suspending the monitors from the HoverPro' multiple suspension points. An optional aiming device, the One-Way-Array®, may be installed in line, above the HoverPro, to provide up to 360 degrees of horizontal rotation. Additionally, a wide variety of standard off-the-shelf rigging hardware is available to allow the installer to safely assemble and "hover" the LCD or plasma monitor at any desired height and angle above an audience, store traffic and window fronts. Power is usually delivered along one of the suspension cables while the signal wire runs down the other suspension cable. Close fitting spiral loom then encloses both suspension cable and wire to deliver a very cosmetically appealing display.
About Adaptive Technologies Group
Adaptive Technologies Group combines the talents and disciplines of Allen Products, ATM Fly-ware and Adaptive Video Walls and Displays, and offers state-of-the art rigging and mounting solutions for a range of audio and video applications. With its combined divisions, Adaptive is a full-service solution provider, by way of the design, development and manufacturing of professionally installed AV mounting and rigging equipment worldwide. Each brand offers its own standard and unique time-saving solutions, best safety practices and unlimited custom designs for any venue, size and application.
In addition to providing a wide selection of popular mounting and rigging solutions, Adaptive is a major resource for hundreds of commonly used and often hard to find rigging hardware and fastener items. Based in Signal Hill, California, all overhead products and parts are made and assembled in the USA. For more information, visit http://adapttechgroup.com.