Platinum Tools® Coax Copper/Steel Cable Cutter Now Shipping

The Platinum Tools CCS-6 is Designed to Cut Copper Cable with Steel Content without Nicking, Degrading, or Deforming the Cutting Blades

CAMARILLO, Calif., Jan. 28, 2013 - Platinum Tools(R) (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce the CCS-6 Cable Cutter (part # 10514) is now shipping. Designed for today's VDV (Voice, Data, Video) and security installers, the CCS-6 has an MSRP of $19.95.


"The Platinum Tools CCS-6 is designed to cut copper cable with steel content without nicking, degrading, or deforming the cutting blades," explained Lee Sachs, Platinum Tools, Inc. president and general manager. "Fully tested to 10,000 cuts on RG6 CCS, copper clad steel center conductor with no degradation to the cutting blades, this compact cable cutter also easily cuts through copper and aluminum cable."

The Platinum Tools CCS-6 provides outstanding cutting performance on all types of solid copper wire, twisted pair, and coax cables. Its optimal blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable."

Additional specs of the Platinum Tools CCS-6 Cable Cutter include:
• Comfortable PVC handle grips
• Forged from SCM 440 steel
• Rust resistant black oxide finish
• Lightweight: 7.22 oz (204.8 g)
• Length: 6.3in (162 mm)
• Technical Data: Coax CCS; Battery; Coax; Messenger; CAT5E UTP/STP; Antenna; CAT6 UTP/STP; DBS; CAT6A UTP/STP; Drop; Shipboard; Ground

For more information on Platinum Tools and its complete product line, please visit www.platinumtools.com, call (800) 749-5783, or email info@platinumtools.com.

About Platinum Tools
Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop the absolute best possible solutions for the preparation, installation, and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely, and high quality manner.

All of our products must absolutely satisfy three critical benchmark criteria…utility of function; quality of function; and economic value. Our people are our company. They, too, must be focused on and work to satisfy three critical benchmark criteria…customer satisfaction; product knowledge and expertise; and willingness to learn and adapt.

# # #

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection