THE GAS EXPORTING COUNTRIES FORUM PERMANENT OFFICE HAS CHOSEN ARTHUR HOLM's DYNAMIC 2 MONITORS FOR ITS QATAR CONFERENCE ROOM

The GAS EXPORTING COUNTRIES FORUM (GECF) permanent office at Doha, Qatar, located at the Tornado Tower, has chosen ARTHUR HOLM Dynamic 2 screens for their conference room.

Barcelona, Spain, January 2nd 2013


The GECF is a gathering of the world's leading gas producers and was set up as an international governmental organization with the objective to increase the level of coordination and strengthen the collaboration among member countries.
The member countries of the forum are Algeria, Bolivia, Egypt, Equatorial Guinea, Iran, Libya, Nigeria, Oman, Qatar, Russia, Trinidad and Tobago, United Arab Emirates and Venezuela. Kazakhstan, Iraq, the Netherlands and Norway have the status of observer members.

The Tornado Tower is a 52 floor office innovative building, designed to minimize the effects on the natural environment. The outer structure is a key architectural feature and the lighting system installed at the junction points of the steelwork accentuates the form of the building at night with a spectacular effect, using 35.000 different light combinations.
The interior design of the GECF conference room has been done by Al Salam Industries, a part of the Al Salam International and the system integration has been designed and implemented by Gulf Business Machines. CGM is a leading IT solutions provider in this region, fulfilling the IT requirements of local, regional and international organizations in the GCC. With offices in the UAE, Bahrain, Kuwait, Oman, Qatar and Pakistan, CGM is a certified ARTHUR HOLM dealer specialized in government, banking, telecommunications, retail and oil installations.
17" Dynamic 2 screens have been used to achieve better visibility and therefore focus on the presentations and so the delegates could have direct access to the voting results. The room has a length of 20 meters; therefore, it was requirement to provide the best visualization of the information to the conference attendants. The use of a screen that automatically rises and tilts 20 degrees was the ideal solution. Furthermore, the elegance of the monitors, which are built in a solid mechanized and anodized aluminium block perfectly fits with the table and with the interior room design.

The 3 central screens also integrate retractable Bosch microphones so both elements are stored inside the table desk when they are not in use, leaving a completely free working space.

All the devices are easily controlled by Crestron through the addressable RS-422 communication protocol of the monitors and the signal is distributed by Extron, who has supplied VGA and HDMI scalers and interfaces.

A Polycom video conference system is also used as well as a Panasonic 103" central screen.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.