Platinum Tools® Launches VDV MapMaster™ 2.0 Length Measurement Voice/Data/Video Tester

Now Shipping, the Updated VDV MapMaster Now Includes Cable Length Measurement, and Combines Continuity Testing, Mapping, and Tone Generator into a Single Unit

CAMARILLO, Calif., May 31, 2012 - Platinum Tools' (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce the launch of the new VDV MapMaster™ 2.0 voice, data, and video tester. Now with cable length measurement, the VDV MapMaster™ 2.0 is now shipping with an MSRP of $129.95. The VDV MapMaster™ 2.0 will be featured at InfoComm 2012, held in Las Vegas, Nev. from June 13-15 at the Las Vegas Convention Center, booth C5038.


"The VDV MapMaster 2.0 now combines cable length measurement with continuity testing, mapping, and tone generator functions into a single unit," explained Lee Sachs, Platinum Tools, Inc. president and general manager. "Made in the USA, the VDV MapMaster is capable of identifying and mapping 19 locations at one time. Whether the job is commercial or residential, the versatility and added features of the VDV MapMaster 2.0 makes it an installer's best friend."

Length Mode is used to measure the length of entire cables and its pin pairs and allows for viewing and adjusting the length constant value for video, data, and voice cables. The VDV MapMaster tests Cat-6, Cat5e, Cat-5, Cat-4, Cat-3, and coax cables, as well as shielded cables. Video and data cables can be connected to their respective remotes at the same time to improve testing efficiency. Patch cables may be tested without removing the master remote from storage.

With a convenient size and weight of only 6.4in x 2.8in x 1.4in and just 9.0 ounces, additional features of the VDV MapMaster include:
• Tests voice (six wire), data (eight wire), and video (coax)
• Measures the entire length of a cable and/or individual wire pairs within the cable
• Easy-to-read , extra large 7-segment LCD screen with large icons
• Tone generator with selectable tone cadence and selectable pins carrying tone
• RJ (voice and data) master remote stores in bottom of case
• Map 19 locations at one time
• Measures length in feet or meters
• Tests and indicates pins with shorts, opens, reversals miswires and split pairs
• Displays "Pass" icon for correctly wired T568A/B and crossover/uplink
• Displays "Pass" icon for correctly wired 6-pin telephone plus "Rev" for reverse pinned
• Voltage detection warning icon
• Long battery life; low battery icon indicator
• Auto power off

Numerous accessories for the VDV MapMaster 2.0 are also available.

For more information on Platinum Tools and its complete product line, please visit www.platinumtools.com, call (800) 749-5783, or email info@platinumtools.com.

About Platinum Tools
Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop the absolute best possible solutions for the preparation, installation, and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely, and high quality manner.

All of our products must absolutely satisfy three critical benchmark criteria…utility of function; quality of function; and economic value. Our people are our company. They, too, must be focused on and work to satisfy three critical benchmark criteria…customer satisfaction; product knowledge and expertise; and willingness to learn and adapt.


# # #

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.