HDMI Matrix Switch with PoC Simplifies Installation using Twisted Pair Cable

HDMI Matrix Switch with PoC Simplifies Installation using Twisted Pair Cable (Cat6). The HD44CATMX and HD48CATMX allows switching and distribution of HD video to 8 or 10 HDTV over Twisted Pair ( CAT 6) cables.

Norcross, Ga. - Octava Inc., specialists in HDMI solutions, announced the release of 2 new PoC enabled HDMI over Twisted Pair Matrix: HD44CATMX and HD48CATMX.


Responding to requests from our Installer and Integrator customers to further improve our already popular 4x8 and 4x4 HDMI over Twisted Pair Matrix we have added PoC, power over cable, to directly power the matching Octava In -room Receiver (Rx). PoC enables direct powering of the Octava In -room Zone Receivers over twisted pair cable( CAT 5 or CAT 6) . This significantly simplifies installation behind your slim line TV, Projector or AVR by eliminating the need for an external power supply for the In -room Zone Receiver (RX).

Features:
•4x8 and 4x4 full non -Blocking HDMI Matrix (Any Source to Any Display).
•Mirrored HDMI + dual RJ -45 Output sockets - enables connection to up to ten (4x8) or eight (4x4) Sink devises (AVR, Display or Projector).
•PoC provides Power to the attached Rx units over CAT5 or CAT6 cables.
•IR, Push Button, Wired IR and RS232 control.
•Rear mounted Wired IR socket - (Optional IR extender Receiver cable available).
•Five Pre -configured User selectable EDID modes.
•One Programmable EDID mode - via USB port.
•3D compatible plus 'Forced 3D' EDID mode.
•Supports 1080p (60/50/24)
•Redesigned Fascia with Mirrored selector buttons for enhanced aesthetics
•Free PC control App.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.