InfoComm Membership Elects 2012 Board Members

InfoComm International®, the trade association representing the commercial audiovisual and information communication industries is pleased to announce election results for the 2012 InfoComm International Board of Directors.

FAIRFAX, VA, USA, 8 December 2011 - InfoComm International®, the trade association representing the commercial audiovisual and information communication industries is pleased to announce election results for the 2012 InfoComm International Board of Directors.


Johanne Belanger of AVW-TELAV has been elected Secretary-Treasurer, and Andrew Milne, Ph.D. of Tidebreak, Inc. and Jan Sandri of FSR, Inc. will serve two-year terms on the InfoComm Board of Directors. In addition, Matt Emerson, CTS, of CEAVCO Audio Visual and Thierry Ollivier of projectiondesign have been appointed to serve two-year terms on the Board of Directors by the Leadership Development Committee.

InfoComm thanks the outgoing Chairman of the Leadership Development Committee Tom Stimson, CTS, of the Stimson Group, Aseem Gupta of Visionaire and L William Nattress III, CTS-D, CTS-I of Shen Milson & Wilke, Inc. for several years of dedicated service to the InfoComm Board of Directors.

"Tom has been a wonderful visionary, helping chart the course of our organization as we deal with 21st Century challenges for the audiovisual and information communications industries," said Randal A. Lemke, Ph.D., Executive Director and CEO, InfoComm International. "I also want to thank Aseem Gupta and Bill Nattress for lending their time and talent to the InfoComm Board. We are richer for their involvement."

A complete listing of the 2012 InfoComm Board of Directors appears below:

Board of Directors

LDC Chair: Jim Ford, PE, Ford Audio-Video Systems,Inc.
President: Greg Jeffreys, Paradigm Audio Visual Ltd.
President-Elect: Tony Warner, CTS-D, CDT, LEED® AP, RTKL
Secretary-Treasurer: Johanne Belanger, AVW-TELAV Audio Visual Solutions

Thomas Berry, CTS, Verrex Corporation
Matt Emerson, CTS, CEAVCO Audio Visual Co., Inc.
Barry Goldin, CTS Audio Video Systems Inc.
Craig Janssen, LEED® AP, Acoustic Dimensions
Andrew Milne, Ph.D., Tidebreak Inc.
Thierry Ollivier, projectiondesign Jan Sandri, FSR, Inc.
Cory Schaeffer, Listen Technologies Corporation

About InfoComm International
InfoComm International® is the international trade association representing the professional audiovisual and information communications industries. Established in 1939, InfoComm has more than 5,000 members, including manufacturers, systems integrators, dealers and distributors, independent consultants, programmers, rental and staging companies, end-users and multimedia professionals from more than 80 countries. InfoComm International is the leading resource for AV standards, market research and news. Its training, certification and education programs set a standard of excellence for AV professionals. InfoComm International is the founder of InfoComm, the largest annual conference and exhibition for AV buyers and sellers worldwide. InfoComm also produces trade shows in Europe, Latin America, the Middle East and China. Additional information is available at www.infocomm.org.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.