Smartec released 8 channel DVR with Full D1 resolution, HDMI -interface and free software

Smartec extends its product range with the new 8 channel recording device, which provides H.264 video recording from analog CCTV cameras at up to 200 fps with Full D1 (720x576 pix.) resolution.

Smartec STR -0883 network DVR records and transmits video over the network in H.264 at up to 200 fps of recording speed. Herewith digital video recorder can transmit high -definition video with Full HD (1920x1080 pix.) resolution on the primary monitor output. STR -0883 is equipped with SATA hard disk drive (with the ability to install 2 additional HDDs), DVD -RW, two USB -ports and eSATA/iSCSI interfaces. In addition, 8 channel DVR allows the operator to control PTZ -cameras operation, and also has alarm inputs/outputs, motion detection and HDMI. New 8 channel model is bundled with RAS+ for remote management and configuration.

Each DVR of this series can record and transmit video over the network with up to Full D1 (720x576 pix.) resolution at up to 200 fps recording speed. For the rational disk space usage 8 channel DVR allows the operator to set the optimal record mode: Continuous, Scheduled, Event, Pre -/Post Alarm and Emergency recording with the highest quality. Due to the audio inputs, STR -0883 can record and transmit video images synchronized with audio signal.

Video recording and storage is carried out on the built -in hard disk drive. To increase archive capacity DVR allows the operator to install up to 2 additional SATA HDDs or use external storage systems. Thus, using eSATA port 8 channel DVR can be connected to the DAS -arrays, which are effective solution for small and medium -sized archive extension. If necessary, the operator can drastically increase archive capacity with network SAN -storage, which is connected to 8 channel model via iSCSI port. Video backup is available on DVD/CD with built -in DVD -RW or external USB devices.

STR -0883 is equipped with multiple video outputs, enabling the operator to conduct full visual analysis of the footage from security cameras. In particular, 8 channel DVR has HDMI/VGA/BNC interfaces, as well as Spot -output for monitor connection (with the ability to configure its settings, transmit alarm video in full screen mode or images from security cameras). HDMI -output of this DVR can be used for Full HD monitor connection, which ensures video transmission without digital -analog conversion.

High reliability of STR -0883 is achieved by using S.M.A.R.T. technology, which permanently monitors current HDD status. In case of HDD malfunction, 8 channel DVR immediately "informs" the operator about the accident to find appropriate solution and ensure the safety of important information. In addition, Smartec DVR allows the operator to restrict access to the archive video content both for network and local levels, using system of passwords and user rights division.

To implement the security functions 8 channel DVR is equipped with hardware motion detection with 5 levels of sensitivity, 192 detection zones and the possibility of a retrospective video search. It also features a notification system for camera lens abuse. For each alarm event DVR allows the operator to set an appropriate response: to activate the buzzer and/or the executive device, to generate and send an e -mail notification with alarm images or display an alarm message for the operator.

Using RS -485 interface, 8 channel model can control PTZ -cameras operation through front -panel buttons, IR remote control, USB -mouse or Smartec STT -2405U external telemetry keyboard. In addition, 8 channel DVR is equipped with RS -232 interface for operation with POS/ATM -terminals. Text information, transmitted from these terminals, can be used as a parameter to search video archives.

An important advantage of Smartec DVR is its free RAS+ software, which can be used for deployment geographically distributed CCTV systems with centralized control. This software enables the operator to view current and archive video (up to 64 video channels), supports alarm outputs and PTZ -cameras operation control. MapEditor software module can create 3D maps, visually displaying where the location of 8 channel DVR and CCTV cameras. To manage CCTV system via mobile devices it is recommended to use RAS + Mobile application.

New Smartec STR -0883 8 channel DVRs are offered from stock by Smartec dealers. For more information about STR -0883 and other Smartec recording equipment, please, contact your Smartec dealers directly.

Under Smartec brand name, a wide range of equipment is supplied, allowing to build traditional and digital video surveillance systems of any configuration and complexity. The product line includes standard analog cameras (color and "day -night"), IP -cameras, varifocal lenses, speed dome cameras, 15" -32" CCTV monitors, 4 -32 -ch DVRs, IP -video servers, camera housings, brackets and other video surveillance devices.

For more information, please, visit:




Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.