Draper Reveals the TheatreMask™ at CEDIA

If you are projecting all kinds of content--from HDTV to CinemaScope--you need the TheatreMaskTM.

If you are projecting all kinds of content - -from HDTV to CinemaScope - -you need the TheatreMaskTM. Available in both WMS (Width Masking System - -height constant) and HMS (Height Masking System - -width constant) formats, the TheatreMask can mask almost any fixed screen to a variety of preset and custom positions.

The TheatreMask is highly streamlined, adding only 2" on each side of the screen frame, less than an inch above the screen, and is just 3 3/4" deep. Installs quickly and easily over the Draper Onyx, Clarion, or other permanently tensioned screen - -even competitive products. Frame is covered with light -absorbing black Vel -tex fabric.
Use the TheatreMask WMS to mask screens in sizes through 152" diagonal 2.35:1 CinemaScope to 1.85:1, 16:9 HDTV, 4:3 NTSC, or any format in between. With the TheatreMask HMS, screens in sizes through 142" diagonal 16:9 HDTV can be masked to any wider format.
You can be one of the first to see the TheatreMask. Visit Draper's booth, 718, at CEDIA 2010, September 23 -26 in Atlanta, GA.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.