VIGITRON expands the digital CCTV line with MaxiiCopper Coax Ethernet Extender Hubs

Vigitron MaxiiCopper Ethernet Extender family provides easy and effective transition from analog to IP CCTV systems.

Vigitron expands its MaxiiCopper family with the introduction of the 8 and 16 ports high speed Ethernet Extender hubs. Models Vi2408 and Vi2416 are the industry's first high -density and rack mountable long distance Ethernet solutions that provide an easy transition from analog to digital CCTV systems using the existing coax infrastructures.


When deployed along with the MaxiiCopper Vi2401 Ethernet Extender at the remote end and the Vi2408 or Vi2416 hub at a central location, they establish a full -duplex, full -rate Ethernet connection up to 5,500 feet (1,680m) at 10Base -T or 2,100 feet (640m) at 100Base -T.

They are completely transparent to the IT networks and do not need any IP programming. These extenders are excellent for high network bandwidth requirements of Mega -pixel cameras or multiple IP cameras. Their high data rate balances the best possible network throughput and long -reach distance design.

Vigitron MaxiiCopper series consist of comprehensive solutions over coax cable as well as the ground breaking Ethernet Extension over UTP cable. These products provide simple and cost -effective upgrade path for a wide range of security and IT applications.

Vigitron is a leading manufacturer of innovative transmission solutions for the global security and IT market. Our products enable you to use your copper infrastructure for either analog or IP CCTV systems at extended distances. We are committed to employing state of the art technology to offer the best products at exceptional value, accompanied by excellent customer service. We bring you the future now.

For additional information on the advantages of Vigitron products, contact us at 888 -574 -8942, e -mail prw@vigitron.com, or visit www.vigitron.com.

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.