Dayton Audio's Ceiling Speakers Feature an Innovative Quick Mount Design!

Dayton Audio's Quick Mount Ceiling Speakers feature a new design that puts an end to struggling with standard ceiling speakers and cuts the time of commercial or home speaker installations in half.

DAYTON, Ohio - - - -The unique spring -loaded mounting system of Dayton Audio's Quick Mount Ceiling Speakers allows an installer to mount the ceiling speaker in mere seconds! Simply cut the hole, attach the wires, insert the speaker into the hole, and pop the ceiling speaker's unique spring activated mounting system -no more drill and ladder balancing acts. This unique mounting system puts an end to struggling with standard ceiling speakers and cuts the time of commercial or home speaker installations in half.


The aesthetically pleasing design of the low -profile trim ring adds a contemporary touch to any office or home environment. Quick Mount speakers work great anywhere with the capability of mounting into ceilings up to 1" thick.

These coaxial speakers provide audiophile grade performance and can handle up 40 watts of music power with a 6.5" poly mica cone with rubber surround and 1" voice coil. A 30 1/2" pivotal silk dome tweeter can be aimed to fill the listening area with smooth, high -frequency sound. The overall response of these speakers are 45 - 20,000 Hz and the 6 dB per octave crossover with high and low pass filters has a poly switch for tweeter protection. Available in 70 volt and 8 ohm versions.

Dayton Audio has been a leading supplier of loudspeaker drivers and speaker building accessories for over ten years. Each product is designed and engineered in the USA to offer the highest level of performance and value. Audio enthusiasts know they can trust Dayton Audio to have the best selection of speaker building products and components for any project. Dayton Audio combines real -world design with high -tech manufacturing techniques. Dayton Audio products can be purchased through the following authorized retailer in the USA: Parts Express (parts -express.com). Visit us online at www.daytonaudio.com

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection