Data Communication Tester Integrates Multiple Interfaces for Ease of Use

It performs both framed and unframed tests on various equipment such as primary multiplexers, digital cross connects, automatic protection switches and circuits at a speed of between 50bit/s and 2048kbit/s.

Toronto, Canada - GAO Instruments (www.GAOInstruments.com) provides its portable data communication tester, a multi -purpose tester designed for the maintenance and trouble -shooting of digital networks. It performs both framed and unframed tests on various equipment such as primary multiplexers, digital cross connects, automatic protection switches and circuits at a speed of between 50bit/s and 2048kbit/s.

This optimized data communication tester, model A0300002, integrates V.24, V.35, V.11, X.21 interfaces, G.703 Co -dir 64kbit/s interface and G.703 -2Mkbit/s interface; accommodations for future interfaces have also been considered. It supports synchronous or asynchronous data transmission via each interface. interface. It generates and monitors PCM30, PCM30 CRC, PCM31 and PCM31 CRC frame structures and provides an error analysis function which allows histograms of error or alarm data to be displayed. The measurement results can be stored in its onboard memory to prevent data loss in the event of power failure.
Visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1 -877 585 -9555 ext. 601 - Toll Free (USA & Canada)
1 -416 292 -0038 ext. 601 - All Other Areas
sales@gaoinstruments.com
About GAO Instruments
GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection