Atlona Releases a new series of RGB Video Fiber Optic Extenders Aimed at Pro Install, Medical, and Government Markets

Atlona's Fiber Optic Extenders, Available in 3GSDI, DVI, RGB/YPbPr, and HDMI, extend high definition signal up to 1000 ft securely, along with audio and RS232, over a single SC Fiber cable

San Jose, CA - July 21, 2009 -Atlona Technologies has released a new line of video extenders that transfer high definition video over multi -mode SC type fiber optic cable up to 1000 ft without any signal loss. These new extenders serve not only as a way for companies to send video signal far beyond the lengths of actual cables, but also provide a measure of security. Since Fiber Optic cable is immune to interference caused by electromagnetic fields (EMF/EMI), these extenders are perfect for medical imaging applications where a perfect picture is not only ideal, but necessary.


Atlona's RGB/YPbPr versions (models AT -RGBF30S and AT -RGBF30R) are capable of sending HD video signal, along with audio and RS232, through multimode fibers (SC connection) allowing any HD Display to extend resolutions up to 400 meters (1320 ft) at HDTV resolutions 720p/1080i/1080p.

These UL/CE approved units are equipped with advanced digital fiber optic technology allowing for self adjustment with no compression, bit reduction, or signal degradation. Multiple signals can be run in a single conduit without crosstalk. The AT -RGBF30SR is CEC compliant and supports 12 -bit color depth and has an 8dB input equalizer, which compensates losses over 5 meters (16 ft). The send and receive units of these RGB baluns are sold as separate pieces to allow users the ability to convert among multiple HD video types depending on the receiver unit. This unit is compatible with Atlona's DVI or HDMI receiver units (models: AT -DVIF30SR and AT -HDF30SR) making it versatile enough to handle even the most complicated digital signage application. These units also feature two -way audio and RS232, allowing for actual communication with attached devices.

Atlona's new AT -RGBF30S and AT -RGBF30R are expected to start shipping by July 7, 2009 with an MSRP of $1,200.00 each.




For more information, press only:
Christopher Bundy, (408) 954 -8782 ext 113, chris@atlona.com

For more information on Atlona Products:
http://www.atlona.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.