Adder Announces Real Time DVI over IP and USB Extender

Adder to Give Sneak Peek of Major Industry Breakthrough at InfoComm

CAMBRIDGE, UK and ORLANDO, FL - June 15, 2009 - Adder, a leading developer of KVM switches, extenders and KVM over IP solutions will preview its newest breakthrough at InfoComm (booth #2673) on June 17 -19 in Orlando, Florida. The AdderLink Infinity, a hardware -based DVI extension device is capable of extending DVI video, audio, and USB signals over unlimited distances using IP and gigabit Ethernet technologies.


"Traditional keyboard, video and mouse extender technologies have suffered from range limitations, the need for dedicated cabling and inflexibility in their inherently point -to -point system design," said Nigel Dickens, Adder's Technical Director. "Adder believed that there must be a better way of providing flexible remote access to computing equipment - one that addresses these issues head on."

The AdderLink Infinity supports an industry -leading DVI -over -IP technology with resolutions of up to 1920x1200 @ 60Hz - full -frame video over a single UTP gigabit Ethernet cable. The unique technology delivers near real time video by using innovative hardware acceleration techniques. These speeds are only possible through Adder's unique adaptive compression technologies which provide very low latencies and give the highest picture quality. Furthermore, the extender supports multicast distribution of video and audio - at no additional cost of network bandwidth or wiring. This makes it possible for video to be multicast to any number of receivers, and any receiver can be configured to see any video source in the system.

Adder's innovative approach to USB extension enables certain classes of USB2.0 compatible peripherals to be supported, including Keyboards, Mice, Touch Screens, Printers and Mass Storage devices. Incorporating bi -directional CD quality audio extension simplifies use of remote speakers, microphone, and headsets.

The new DVI over IP and USB extender will eliminate the range problems of desktop extension, making centralized management of desktops a reality. Furthermore, with the built -in multicast capabilities of both video and audio, the extender will be ideal for many video distribution applications. The inherent configurability of the system, allowing dynamic switching of video sources and endpoints means that it can be used in the most complex of video and desktop switching applications.

The AdderLink Infinity will be available in Q3 2009 through local distribution partners around the world.

About Adder
Adder is a leading developer of KVM technology and extenders. Adder's advanced range of KVM switches, extenders and IP solutions enable the control of local, remote and global IT systems. The company distributes its products in more than 60 countries through a network of distributors, resellers and OEMs. Adder has offices in the United States, United Kingdom, Germany, the Netherlands, and Singapore. Visit http://www.adder.com.

# # #
PR Contacts

N. America
Michael Becce
MRB Public Relations
1 -732 -758 -1100x104
mbecce@mrb -pr.com

Heather Santos
Adder Corporation
US.PR@adder.com
EMEA
Jamie Shepperd
Adder Technology
EMEA.PR@adder.com

Asia Pacific
CH Leong
Adder Asia
APAC.PR@adder.com

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.