Furman Announces P -6900 AR E Voltage Regulator/Power Conditioner and P -2300 IT E Balanced Power Conditioner

New Prestige Export Series Power Management Solutions Specifically Engineered for Pro A/V Applications in 220V-240V Regions

PETALUMA, Calif. - June 03, 2009 - Furman, a world -leading provider of power management solutions, today announced the newest additions to its Prestige Export Series of advanced power management solutions for 220V -240V regions: the P -6900 AR E rack -mount voltage regulator/power conditioner and P -2300 IT E rack -mount balanced power conditioner.

Ideal for providing power to A/V equipment in high -current applications, the P -6900 AR E features voltage regulation, power protection, and noise filtration at 30A capacity. The unit accepts input voltages from 188V to 270V and converts them to a steady, stable output, user -selectable to 230V or 240V (10V). Voltages approximately 10% beyond that range may be converted to usable levels, depending on the requirements of the equipment. This stable voltage protects equipment, allows optimal performance, and corrects problems caused by abnormally high or low voltages, including equipment lock -ups, overheating, and premature failure.

The P -6900 AR E's True RMS Voltage Regulation technology is driven by an ultra -low -noise, microprocessor -controlled, eight -tap toroidal autoformer engineered for use in any A/V environment. True RMS Voltage Regulation provides quiet operation for critical listening and recording applications with minimal leakage of stray magnetic fields. The autoformer's solid -state switching design does not inject noise into the audio signal, providing stable and quiet operation when subjected to severe voltage fluctuations - even when connected to power generators.

Power to the P -6900 AR E is supplied via a 30A C -Form connector with included female mating connector for termination of a custom line cord. Eight IEC C -13 receptacles (six rear panel, two front panel), two IEC C -19 receptacles, and one 30A C -Form receptacle are provided. All receptacles are fully regulated, protected, and filtered.

For mission -critical A/V installations such as recording, broadcasting, and mastering studios, or anywhere that pristine, ultra -low -noise power is necessary, Furman has introduced the P -2300 IT E balanced power conditioner. The P -2300 IT E provides safe, symmetrically balanced power to connected equipment for the lowest noise floor possible. The unit features over 80dB of linear common -mode noise reduction provided by a massive 43kg center -tapped, symmetrically balanced isolation transformer. The P -2300 IT E operates at 10A capacity and features fourteen IEC C -13 outlets (12 rear panel, two front panel) in two isolated outlet banks.

Both Prestige units are rack -mountable (3 -RU), with rear rack mounting ears included. The models feature Furman's proprietary Series Multi -Stage Protection (SMP) for comprehensive, non -sacrificial surge/spike protection, Extreme Voltage Shutdown (EVS) to protect equipment from dangerous extreme voltage conditions, and Linear Filtering Technology (LiFT) for up to 50dB of differential noise reduction.

Convenience features include a front -panel digital voltmeter/true RMS ammeter with color -coded "Voltage Range," "Protection OK" and "Extreme Voltage" indicators for comprehensive power monitoring, and a front -panel USB charger for cell phones, personal media devices, or to power a USB lamp. Both models are safety agency listed (CE).

"We are very excited to introduce our newest Prestige Series power management solutions to our customers in 220V -240V regions," said Dave Keller, senior vice president of sales and marketing for Panamax/Furman. "These new products provide the most advanced power protection and filtration technologies available on the market, and are ideal for a wide range of professional A/V applications."

Both the P -6900 AR E and P -2300 IT E will begin shipping in August 2009.

# # #

About Furman
Furman has been an international leader in developing award -winning, innovative power management products for more than 30 years. The company's products give audio/video systems the pure, noise -free power they need for superlative performance while protecting them from damage caused by power surges and lightning. As part of Panamax Inc., Furman addresses all major electronic markets, including home theater, professional audio and video, the music industry, broadcasting, audio/video recording, and office equipment. Furman is based in Petaluma, Calif., and sells through an international dealer network and through select retail outlets. More information is available at www.furmansound.com.

All trademarks appearing herein are the property of their respective owners.


Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.