Atlona Technologies soon to release 10 -input Switcher / Scan Converter with Single HDMI (1.3) output, the AT -HD600

Atlona Technologies, a solution based manufacturer of Audio Video accessories, announces the upcoming release of new 10-Output Switcher/Scan Converter with single HDMI 1.3 Output, the AT-HD600

Atlona Technologies announces the upcoming release of their newest product, the AT -HD600. This unit is a Switcher/Scan Converter that boasts 10 inputs with a single HDMI 1.3 out. The HD600 has the capability to switch and convert between a wide range of video -signal formatted Inputs including 2 x Composite, 2 x S -Video, 2 x Component, 1 x VGA, and 3 x HDMI; all to a single HDMI 1.3 Output. Along with supporting High resolutions of up to 1080p, Audio is embedded in this unit from every formatted input through the HDMI output. With an included Audio delay adjustment, users can be sure that the high quality audio and video being used are completely in sync.


For maximum product management, the AT -HD600 can not only be controlled manually through the front panel, but also through IR remote and RS232 in order to program or control switching from a computer or another control system. Along with these attributes, this Switcher is both PAL and NTSC compatible for users all over. Though this unit does not have a built -in scaling function, it has been moderately priced to compensate.

"This multi -channel switch is perfect for any integrator using Crestron, Universal Remote Control, HAI, Control4, RTI, AMX, or any other Control Unit," says Atlona Product Manager Michael Khain. "There isn't anyone who generally affiliates themselves with AV products that wouldn't have use for this one." The AT -HD600 10 -input Switcher/Scan Converter has every video formatted input necessary to satisfy any Audio/Video need. With the capability of incorporating older as well as newer AV appliances (PS3s, VCRs, any set top -boxes, all DVD/ Blu -Ray Players, etc.), industry installers and even end users alike will enjoy the many uses of this and affordable and pragmatic product.

Atlona's AT -HD600 Switcher/Scan Converter will be available late June with an MSRP of $389.00.


Atlona Technologies is a registered trademark of Lenexpo Inc. in the United States and/or other countries.
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.

For more information, press only:
Joshua Carlson, (408) 954 -8782 ext 123, JCarlson@atlona.com

For more information, sales only:

Western Regional Sales Manager:
Gilbert Serrano (408) 954 -8782 ext 114, GSerrano@atlona.com

Eastern Regional Sales Manager:
Kevin Billingsley (408) 954 -8782 ext 122 Kevin@atlona.com

For more information on Atlona Products:
http://www.atlona.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.