GSM REMOTE CONTROL - Remote control using a cell phone from anywhere in the world

Open automatic gates, control central heating, engine pre-heaters, aviation engine heaters, irrigation systems, water well pumps, pumping stations, using your cell phone from anywhere in the world

GSM -AUTO have recently launched a remote control system using the GSM mobile/cell phone network.


The GSM -AUTO is a wireless gsm remote control switch that connects to the GSM cell phone network.

It is activated by calling its cell phone number, it will reject the call without answering and switch on the device connected to it

There are no call costs incurred when dialling the unit, it will recognise an authorised telephone number calling it and reject the call without answering

It has 2 independent switches, these can be programmed to switch on for a pre -determined length of time whenever the GSM -AUTO is called, alternatively the switches can be permanently switched on or off by sending the GSM -AUTO a sms text message

Contact sales@gsm -auto.com
Website http://www.gsm -auto.com

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.