Easily Switch Between Two Hi -Def Sources and Two Mirrored Displays with the Gefen 2x2 Switcher for HDMI v1.3

To install, users simply connect their two hi-def sources to the Switcher's HDMI inputs, and their two HDTVs and/or projectors to the Switcher's HDMI outputs. No complex procedures are needed to switch between both sources, viewing the selected sour

CHATSWORTH, CA - Connectivity solutions provider Gefen today announced the release of its 2x2 Switcher for HDMI v1.3, giving plug and play access to two video sources from two displays using the HDMI v1.3 format. With support for enhanced features such as deep color, lip sync, DTS Master Audio and Dolby True HD, this switcher offers a high quality method of system integration.


HDCP compliance and CEC pass -through capability ensure this switcher will work with all of today's high definition systems. Resolutions are supported at 1080p full HD. Blu -ray players, set -top boxes, gaming consoles and any device using the HDMI format to connect to a display can be accessed and viewed using Gefen's 2x2 Switcher for HDMI v1.3.

Gefen's 2x2 Switcher for HDMI v1.3 supplies two HDMI inputs and two HDMI outputs, driven by a 5 -volt power supply. Both HDMI outputs are mirrored, showing the same hi -def video and audio from the selected source. Users switch between sources using the IR remote that comes with the unit. EDID and reset buttons are included to fine tune imagery and improve connectivity.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.