Everyone's talking about it, Marmitek has it: wireless HDMI!

Send a 1080p True Cinema signal without without cables.

EINDHOVEN - MARMITEK, specialist within the sphere of audio/video transfer and connectivity, is introducing the GigaVideo800 HDMI. Marmitek is further proving itself to be an innovative player by offering a working wireless HDMI solution that is available immediately. The GigaVideo800 HDMI sends the HD signal wirelessly from a maximum of four connected HD devices to your HDTV or projector without compression and without any loss of quality.

Wireless HDMI was announced by various suppliers a few years ago but, until now, very little had happened in practice. Or, to be more specific, the products that were introduced did not meet up to quality expectations or, until now, they have not actually been ready for delivery. With the introduction of the GigaVideo800 HDMI, Marmitek has proved that high quality, wireless HDMI really is possible and it is available now.

Flexible positioning of your TV screen or projector
Enthusiasm about a beautiful TV mounted on the wall as if it was a painting is slightly diminished when you realise that the cabling is difficult to hide. Also, awards for beauty are not generally forthcoming for the cables that run to your projector on the ceiling. The Marmitek GigaVideo800 HDMI means that this issue can be consigned to history. You mount the receiver, simply and invisibly, on the wall behind your TV or on the ceiling next to your projector. An ingenious system allows you to continue to operate the connected HD devices even though they are installed out of sight.

This wireless HD signal bridges a distance of up to 20 metres to your HDTV or projector without any loss of quality, using the GigaVideo800 HDMI. The Marmitek GigaVideo800 HDMI sends the 1080p signal without first compressing it. The wirelessly received signal is sent on without any delay (perfect for game consoles) and has exactly the same properties as a signal that is sent via a high quality HDMI cable.

Four devices
The GigaVideo800 HDMI comprises two beautifully styled cabinets that serve as transmitter and receiver respectively. The receiver is connected to the TV, while the transmitter can be connected to a maximum of four (HD) devices. This includes Blu -ray® players, digital video recorders (DVRs), HD set -top boxes, game consoles (Wii, PS3™ or Xbox® 360), Media Centre PCs or standard DVD players/recorders. Switching between these devices is simply done by pressing a button on the remote control provided. An important advantage of the GigaVideo800 HDMI is that it is no longer necessary to constantly switch the cables from your HD devices to the HDTV or the projector.

The Marmitek GigaVideo800 HDMI supports all digital resolutions, including 480p, 576p, 720p, 1080i and 1080p True Cinema. The product 100% satisfies the HDCP standard. High -bandwidth Digital Copy Protection (HDCP) is a system for preventing piracy. Decoders with HDCP only provide a digital signal to equipment that is also supported by HDCP, such as the Marmitek GigaVideo800 HDMI.

Price and availability
The Marmitek GigaVideo800 HDMI has a recommended retail price of 599 incl. VAT and is available for immediate delivery.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.