SmartLabs, the Leader in Home Automation Products, Announces the Release of Four New INSTEON Devices

SmartLabs, Inc. releases SeriaLinc, In-LineLinc Relay, INSTEON Motion Sensor Floodlight and INSTEON PowerLinc Modem, USB.

Irvine, CA - SmartLabs, Inc. announces the release of SeriaLinc - INSTEON to 2 -Way RS232 Serial Converter, In -LineLinc Relay - INSTEON On / Off Module (Non -dimming) w/ Sense, INSTEON Motion Sensor Floodlight and INSTEON PowerLinc Modem, USB.

From whole -home audio to security systems and automation controllers, SeriaLinc allows any Serial or RS -232 -compatible devices to operate devices on your INSTEON network. This solution will let user's keep the equipment they already own and take advantage of a reliable INSTEON network. SeriaLinc is 2 -way serial, so it can be used to control RS -232 devices or to control INSTEON devices via RS -232 commands.

In -LineLinc Relay w/Sense
The latest INSTEON In -LineLinc module is a remote control in -line On/Off switch that is able to switch dry -contact and low -voltage devices and has an external "sense" wire that triggers when a 120 VAC is detected. In comparison to previous In -LineLinc models, this is rated for 15 amps (up from 13 amps), has a smaller size that allows the unit to be placed inside more types of electrical boxes, and an added beep sounder to aid in linking.

INSTEON Motion Sensor Floodlight
The new INSTEON Floodlight will not only turn on the built -in floodlights when motion is detected but can also turn on additional lights and/or notify you that someone is outside your home. The Motion Sensor Floodlight communicates like any other device on an INSTEON network, so the floodlights can remotely controlled from anywhere. The INSTEON Motion Sensor Floodlight features adjustable time delay, night -only mode, and 110 -degree detection zone. Bulbs sold separately.

INSTEON PowerLinc Modem, USB
The INSTEON PowerLinc Modem, USB is a plug -in home automation interface that uses a USB connection and allows PC -based automation controllers to control INSTEON -compatible lights, appliances, heating/air conditioning systems and alarm systems directly via the INSTEON network.

"These new products signify our continued commitment of integrating INSTEON into complex systems as well as enhancing basic home automation functionality," says Laurie Maroni, Vice President of Marketing at SmartLabs.

INSTEON home automation technology provides customized control and communication of lighting and appliances throughout the interior and exterior of a home. INSTEON products let you create a network of controlled devices and scenes that make life convenient, fun and energy efficient.

SmartLabs' INSTEON dual -mesh, wireless home control networking technology uses a simple, low -cost combination of wireless and power line communications. Using INSTEON, it is easy to link together home systems such as lighting, security, HVAC (comfort control), A/V, appliances and sensors, allowing them to be controlled or monitored from anywhere in the world. INSTEON -compatible products can also bridge to other networks, such as Wi -Fi LANs, the Internet and telephony, serving as the foundation for robust, integrated home control. The INSTEON Alliance is comprised of over 1000 developers and offers a focused community for developers and manufacturers to incorporate the INSTEON standard into products.

For more information:

SmartLabs, Inc.
Mike Scharnagl, 949 -252 -6962

-### -

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.