HDMI v1.3 Solutions from Gefen Enhance A/V Systems using the Next Generation Format

Gefen brings a complete family of HDMI v1.3 solutions to IS Europe, each offering a reliable means to switch, split and extend high definition systems using the expanded HDMI format.

The 4x2 Switcher for HDMI v1.3 connects four HDMI sources to two displays, allowing users to switch

between sources using an IR remote. The selected source is sent to two HDMI displays, it ideal for dualdisplay
or a display/projector environments.
The 8x8 Matrix for HDMI v1.3 connects eight HDMI sources to eight HDMI displays. Each source can be sent
to any one display or to all eight displays. Sources are selected by IR remote or RS -232 for easy integration
with automation systems.
The 4x4 Matrix for HDMI v1.3 connects four HDMI sources to four HDMI displays. Selected sources can be
sent to one display or four displays with control through an IR remote or RS -232 connection.
The HDMI v1.3 over Fiber Extender sends any HDMI display up to 500 meters from its source using just one
fiber optics cable. Optional RS -232 and IR extension can be added with one CAT -5 cable.
The HDMI v1.3 over CAT -6 Extender uses just one CAT -6 cable to extend an HDMI display up to 50 meters.
Full HDCP -compliance and CEC control provides todayʼs most reliable method of video delivery.
The 1:8 HDMI v1.3 Distribution Amplifier is a wall -mountable unit that can be hung on a stud and supplies
one HDMI input and eight HDMI outputs for an instant delivery of audio and video. Users can select between
8 and 12 bit video, and two -channel or multi -channel audio on the output.
HDMI v1.3 Flat Cables come in black and are flat to allow for easy placement under carpet and in similar,
tight -fitting areas. Their small form factor gives installers a convenient option when running wires, and are
available in lengths of 2, 3 and 5 meters.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.