UTP transmission with Automatic Video Compensation from Vigitron

Vigitron, Inc., a leading manufacturer of video transmission over Unshielded Twisted Pair (UTP) products, has introduced UTP active receiver hubs with Automatic Video Compensation (AVC).

The new Vi6200 and Vi6300 series of active receiver Hubs with Automatic Video Compensation (AVC) are capable of transmitting and receiving video images over UTP cable through mid range (4,000 Feet) to long range (6,500 Feet) at a price that is affordable for installers and end -users.


Integrators can fit a Vi6300VT active transmitter at the camera in the knowledge that a Vi6200 series hub in the site control room will automatically compensate for video loss up to 4,000 Feet. Similarly, the Vi6300 series provides excellent image quality up to 6,500 Feet. The receivers do not require any adjustment to achieve excellent video quality.

The new Vigitron models fit in a standard 19 -inch rack and are supplied with rack mounting kits and a full set of interconnecting cables. Integrators and distributors will appreciate that the equipment is uniquely designed for the PAL video standard and is fully compatible with other worldwide video standards NTSC and SECAM.

The units' immunity to noisy crosstalk and interference (70 dB) is among the best in the industry and there is built -in ground loop isolation to remove damaging hum bars and distorting ground loops. Engineers will also benefit from compatibility with qualified UTP built -in cameras, any passive transmitters and the smallest video transmitter in the world, the Vi1003M.

There are video -present diagnostic LED indicators for each channel and the connectivity options (screw terminal or RJ -45 connector) complement Vigitron's extensive line of video -power -data transmission equipment.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.