AudioSource®'s New In -Wall Subs and Sub Amp Now Shipping

AudioSource's 8- and 10-Inch In-Wall Subs Perfect for Opening Up Premium Floor Space While Still Attaining Premium Home Theater and Stereo Audio Reproduction

PORTLAND, Ore., July 23, 2008 - AudioSource®, a division of Rodin, announced that its new AS Series of in -wall subwoofers and its new AMPSUB210 subwoofer amp are now shipping. AudioSource will feature these new subs and sub amp at the 2008 CEDIA Expo, held in Denver from Sept. 4 -7 at the Colorado Convention Center, booth 560. The 8 - and 10 -inch in -wall subs are perfect for opening up premium floor space while still attaining premium home theater and stereo audio reproduction, while the AMPSUB210 rounds out AudioSource's complete line of affordable yet versatile and performance -driven home audio electronics.


"The latest in -wall subwoofer systems take premium home theater and stereo audio to the next level," explains Stewart Millager, AudioSource director of engineering. "Our in -wall sub systems, complete with two available in -wall models to choose from, allow contractors and consumers alike an option to get their audio components up off the floor when floor space is at a premium and floorstanding or bookshelf subs are not an option, or when the common ugly black box subwoofer is not the first aesthetic choice for a room."

Features of the AudioSource AS8SW 8 -inch In -Wall Subwoofer include:
• Power Capacity Min/Max . . . . 10 - 100 W
• Frequency Response(+/ -3) . . 40Hz -300Hz
• Impedance . . . . . . . . . . . . . . . 8 ohm
• Sensitivity . . . . . . . . . . . . . . . . 87 dB
• Woofer . . . . . . . . . . . . . . . . . . 8" Carbon / Polypropylene
• Outer Dimension . . . . . . . . . . . 10" (25.4 cm) x 10" (25.4 cm)
• Cut Out Dimension: . . . . . . . . . . 8 3/4" (22.2 cm) x 8 3/4" (22.2 cm)
• Mounting Depth . . . . . . . . . . . 4" (10.16 cm)
• MSRP: $149.99

Features of the AudioSource AS10SW 10 -inch In -Wall Subwoofer include:
• Power Capacity Min/Max . . . . . 15 - 150 W
• Frequency Response (+/ -3) . . . . 33Hz - 300Hz
• Impedance . . . . . . . . . . . . . . . . . 8 ohm
• Sensitivity . . . . . . . . . . . . . . . . . 88 dB
• Woofer . . . . . . . . . . . . . . . . . . . . 10" Carbon / Polypropylene
• Outer Dimension . . . . . . . . . . . . 12" (30.5cm) x 12" (30.5 cm)
• Cut Out Dimension: . . . . . . . . . 10 5/8" (27cm) x 10 5/8" (27cm)
• Mounting Depth . . . . . . . . . . . . 3 3/4" (9.5cm) x 3 3/4" (9.5cm)
• MSRP: $199.99

Millager added that AudioSource's new AMPSUB210 subwoofer amp is ideal for use in audio and home theater systems where power and performance are desired to push passive subs to their limits so they, too, perform at their best.

Features of the AudioSource AMPSUB210 subwoofer amplifier include:
• 8 Ohm Stereo: 200W
• 4 Ohm Stereo: 300W
• Provision for subwoofer -specific equalization module
• MSRP: $699.99

Due to continual product improvement, all specifications subject to change without notice.

Rodin is located at 9200 North Decatur Street, Portland, Oregon, USA 97203. For more information, please call 503 -978 -3321, or visit www.rodinaudio.com

Rodin is a Portland, Oregon -based company established in 1985 that designs and develops high quality high -performance products for the custom install home and the mobile audio markets. The company markets its products under the Phoenix Gold, AudioSource and Carver brands.

# # #

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.