TVOne -task DVI Routing Switcher with HDCP Now Available

The 1T-SX-524 is a professional HDCP Compliant DVI routing switcher that can switch up to four inputs.

ERLANGER, KY, March 5, 2008 - The TVOne -task 1T -SX -524 DVI Switcher is a compact, high performance product designed to meet the most demanding requirements for the switching of DVI signals with HDCP copy protection. The 1T -SX -524 has four inputs, and it can be controlled from the front panel input selection button or the included infrared remote control. The unit has a MSRP of $349.

The 1T -SX -524 has a maximum pixel rate of 165 MHz provides resolution capabilities up to 1920x1200 and 1080p. The unit has DVI -I connectors for the input and outputs and is powered by an included power adapter that provides 5VDC for operation. If a conflict exists with other IR remote controls in the operational environment, the included IR remote controller can be easily reprogrammed to avoid the problem.
An LED display indicates the current input selection and the presence of DC Power. An IR Remote Receiver Option is available for applications requiring the unit to be hidden from view or when it is desirable to extend the range beyond a direct view of the unit such as around a corner.
For more information, contact Amy Fraley at TV One. To download an accompanying image suitable for publishing along with this news release, please use the following link, which will take you to the TV One Product Photo web page: http://www.tvone.com/press_photos.shtml and scroll down to 1T -SX -524.

From TV One, 1350 Jamike Drive, Erlanger, KY, 41018, 800 -721 -4044, 859 -282 -7303, http://www.tvone.com.
#####
Founded in 1991, TV One specializes in video, audio and multimedia processing equipment, based on its proprietary CORIO video conversion technology. Centrally located in Erlanger, KY with offices across the globe, TV One manufactures a complete line -up of products for the professional and broadcast video market.


Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.