Amplify your Audio with TV One's S2 -101AA

The S2-101AA Professional Audio Power Amplifier has joined TV One's S2 Series line-up.

The S2 -101AA Stereo Audio Power Amplifier is the latest additional to TV One's functional S2 Series. It provides for a wide range of audio input connections including RCA jacks, Mini -Combicon Terminal jacks and a 3.5mm single ended jack to accommodate PC audio inputs. The output connectors utilize spring loaded terminals for connection to external speakers. The S2 -101AA has a Recommended Retail Price of £335 (493) and is available now.


The S2 -101AA provides 10 watts RMS per channel into a 4 ohm load when signals from a pre -amplified source are provided as inputs. It operates with very low Total Harmonic Distortion (THD+N), very high Signal to Noise Ratio (S/N+N) plus Crosstalk is greatly minimized. Frequency Response is a very wide 20Hz to 24kHz and the inputs can be either balanced or unbalanced. To prevent speaker damage, the unit has Pop Suppression upon turn on. It also features short circuit and over temperature protection.

Mechanical construction uses the same form factor as the companion S2 switcher products and the S2 -101AA can be rack mounted using the optional RM -220 single/dual rack mount kit. The unit may be controlled by the front push buttons, the Downloadable Windows® RS -232 Controller or through Infra -Red Support. The unit is powered by a +12VDC/4 Amp Power Supply.

The entire TV One product line can be viewed on website www.tvone.co.uk, alternatively you can contact the European Sales and Technical Department on +44 (0) 1843 873311 or at sales.europe@tvone.com.


Featured Product

VMP’s Rugged FRM Series Non-Penetrating Roof Mounts

VMP's Rugged FRM Series Non-Penetrating Roof Mounts

Video Mount Products is a leading provider of mounting solutions for the residential, security, commercial, and pro audio/video markets. Its FRM Series of non-penetrating roof mounts are designed for wireless security surveillance systems, as well as DBS, off-air antenna, and satellite internet systems. Using standard 8in x 8in x 16in cinderblocks as ballast, the FRM-Series provides a great way to roof mount security equipment without damaging the roofing surface and can also serve as a mounting base for many of the security industry's popular parapet mounts. All VMP non-penetrating roof mounts provide installation strength and durability for lasting reliability and peace-of-mind.