TV One shows Wired and Wireless DVI Extenders at ISE 2008

New on the TV One stand at ISE 2008, being held next month in Amsterdam, will be transmission of DVI over a single Cat.5 cable as well as wireless DVI connectivity.

TV One are set to impress visitors by showing these fantastic products working in conjunction with their Switcher/Scaler systems to produce the same incredible quality of converted and scaled picture images that TV One are well -respected for.


A single DVI signal coming from a TV One CORIOflex system will be split into two with one being transmitted over 300m of Cat.5 cable before being fed into a C2 -7200 Dual Channel Scaler from TV One. The second signal will be input straight into the C2 -7200 from the DVI splitter and acting as a dual picture in picture device, the C2 -7200 will be used to place the two inputs into windows and place them side by side onto one 42inch LCD. Visitors to the stand will be able to see and compare the insignificant difference in picture quality from both signals even though one signal has travelled considerably further.

Also being shown on the TV One Stand will be a wireless DVI connection. A HD PC output will be fed into a TV One C2 -7100, along with the output from an HD Camera and a separate video source, to create a dual picture in picture on a PC background. This new processed image will output from the C2 -7100 into a wireless DVI transmitter to be picked up by a wireless DVI receiver at the opposite end of the TV One Stand, where the signal will be fed to a 46" High Definition Monitor.

This new technology being shown on the TV One Stand will be making its ISE debut in January 2008 and is sure to be a big attraction. Details of how to register FREE for the ISE 2008 exhibition can be found on the TV One website www.tvone.co.uk. Alternatively contact their European Sales and technical department on +44 (0)1843 873311 or at sales.europe@tvone.com for more information.

Featured Product

Universal Robots Add a Sense of Touch in New e-Series Cobots with  Built-in Force/Torque Sensor and Re-Designed User Interface

Universal Robots Add a Sense of Touch in New e-Series Cobots with Built-in Force/Torque Sensor and Re-Designed User Interface

With the new e-Series cobot line, Universal Robots raises the bar for cobots, adding unique new features while significantly strengthening the four core principles defining collaborative robots: fast set-up, easy programming, flexible deployment, and safe operation. With a new built-in, tool-centric Force/Torque sensor the e-Series is ready to take on applications requiring force control right out of the box. A repeatability of 30 micron means the new cobots are suitable for very precise finishing, assembly and electronics tasks. A re-designed user interface decreases cognitive load and expedites program development, while a new externally accessible, 500Hz system bus enables more complex motion control algorithms or profiles.