AudioSource® Introduces AMP 150, 2 Channel Power Amplifier

New AMP 150 Replaces AMP ONE/A in AudioSource Line Up

CEDIA 2005, INDIANAPOLIS, September 7, 2005 - AudioSource® a division of Phoenix Gold® International, Inc., introduces the new AMP 150 Amplifier at the CEDIA Expo, beginning today in Indianapolis.


The new two -channel amplifier - Model AMP 150 - is ideal for use in audio and home theater systems. Multiple units can easily be installed in distributed whole -house or multiple -zone audio systems. Phoenix Gold's very capable engineering team designed this new amplifier, which incorporates technology from their successful series of AudioSource® power amplifiers. They are all powerful, solidly constructed, and built for quality and reliability.

The AMP 150 offers the user a rugged and reliable amplifier that is modesty priced, ideal for a wide range of applications. Output power is from 75 watts per channel into 8 ohm loads to 125 watts per channel into 4 ohm loads in the AMP150, with THD+N at less than 0.2%. The amplifier can also be cosmetically matched as needed with the AudioSource® AMP 200 and AMP 300. The AMP150 amplifier features front panel controls for Power, Volume, Balance, rear -panel switches for bridged mono, an Auto ON feature and a 12VDC Trigger, In and features a high current linear power supply.

The AMP 150 Amplifier from AudioSource® will be available in the Fall of 2005 at a suggested price of $399.00. The AMP 150 can be seen with other fine products from Phoenix Gold in Booth 319, Indianapolis Convention Center, during CEDIA.

Phoenix Gold International, Inc, founded in 1985 and located in Portland, Oregon, designs, manufactures, and sells innovative high quality, high performance electronics, accessories and speakers to the audio market. The Company's products are used in the car audio aftermarket, professional sound installations, and in custom audio/video and home theater applications. Products are sold under the brand names Phoenix Gold®, Carver®, Carver Digital™, Carver Professional™ and AudioSource®.

# # #

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.