Snell Announces the Introduction of a Dedicated Subwoofer Amplifier

Capable of driving two subwoofers, the 200-watt SPA200, is the perfect companion for Snell's passive subwoofers

CONTACT:

J. B. Stanton Communications
860/542 -1234 Voice • 860/542 -0005 Fax
Kim Wilson/ [818] 843 -5555 Voice
[818] 843 -5554 fax
kimw@jbstanton.com
Bryan Stanton / jbs@jbstanton.com


Snell Announces the Introduction of a Dedicated Subwoofer Amplifier

Capable of driving two subwoofers, the 200 -watt SPA200, is the perfect companion for Snell's passive subwoofers


CEDIA EXPO 2004, INDIANAPOLIS, IN. Sept. 7, 2004 -Snell Acoustics, acclaimed for their leading -edge designs introduces an external subwoofer amplifier, the SPA200, for use with their passive in -wall subwoofers.

The SPA200 is a 19 -inch rack mountable amplifier to match up with Snell's passive in -wall subwoofers, the AMC Sub10 and the AMC Sub88 . The amp delivers 200 watts at 4 ohms of continuous power. It features a variable low pass filter (40Hz -160Hz /24dB octave), variable level control, plus a 0 /180 degree phase switch. It comes with switchable EQ specifically optimized to flatten and extend the response of Snell's in -wall subwoofers. The SPA200 also provides a 12 -volt and music -sense turn on.

There is a stereo line level input, in addition to an LFE line level with crossover bypass. The LFE input should be used with surround processors that provide their own internal and adjustable bass crossover. All inputs are gold -plated RCA connectors.

The SPA200 is set at a suggested price of $600 and will be available in 4th Quarter 2004. All of Snell's new products can be seen in Booth 650 at the Indianapolis Convention Center during CEDIA Expo 2004.

###

For high -resolution artwork, contact Angela Jennette by email angelaj@jbstanton.com or phone [860] 542 -1234 ext. 118




Featured Product

Platinum Tools - ezEX-RJ45 Termination & Test Kit

Platinum Tools - ezEX-RJ45 Termination & Test Kit

The new EXOtm Crimp Frame and ezEX-RJ45® Connectors provide the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductor