Digital Video Distribution Amp from Gefen Also Switches Sources

The ex-tend-it 2:8 HDTV Distribution Amplfier from Gefen distributes up to 8 HDCP-compliant high definition video signals, and can be stacked to distribute more than 40 signals at the same time.

Indianapolis, IN - CEDIA 2004 - Not only can one digital video signal be split and distributed to eight displays with Gefen's ex -tend -it 2:8 HDTV Distribution Amplifier, the input video can be switched between two sources as well. This new distribution amplifier is designed for application in venues that send the same video graphics to multiple displays for presentation, education or entertainment purposes. For greater video demands, the 2:8 HDTV DA can be expanded through a ninth output to attach additional units (up to 6) allowing for the potential to distribute video to more than 40 displays at the same time. This ninth output can also be used to drive an additional display (9 total).


The unit supports displays that are placed locally or remotely. If extended to remote locations, the 2:8 HDTV DA is capable of distributing the video up to 1000 feet in distance, when used with a separate extension solution, such as Gefen's DVI -1000 HD.

The 2:8 HDTV DA is compatible with DVI (digital video interface) video sources, displays and projectors. Multiple high definition video resolutions are supported up to 1080p. The unit supports standards for DVI -compliant displays, including HDTVs that use DVI to connect to their source.

Price:
$1299

Specifications:
DVI Amplifier Bandwidth: 1.65 GHz
Actual Bandwidth: 1.65 GHz
Input Video Signal: 5 volts p -p (TTL)
Input DDC Signal: 5 volts p -p (TTL)
DVI Connector: Molex 24 pin female connector
Remote Connector: RJ -11
Power Consumption: 15 watts (max.)
Shipping Weight: 9 lbs.

Featured Product

Platinum Tools - ezEX-RJ45 Termination & Test Kit

Platinum Tools - ezEX-RJ45 Termination & Test Kit

The new EXOtm Crimp Frame and ezEX-RJ45® Connectors provide the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductor