Quiet cooling....in high style!

When you have to ventilate a cabinet, but the cooling can`t look `pasted on`, one of the Cool-vent series from Active Thermal Management may be just the answer.

Active Thermal Management introduces

2 new finish -to -match powered wood vents

Cool -vent™ II and III - high style venting for cabinets…


Active Thermal Management announces two new powered wood vents to join the original Cool -vent (now renamed "Cool -vent I").

Available unfinished in 26 species of woods, the new Cool -vent models are larger and move more air than Cool -vent I, while maintaining near -silent operation. Available in 26 species of wood, from American Cherry to Teak, they easily separate into fan and grille sections for ease in staining or painting.


The Cool -vents by Active Thermal Management solve venting and appearance problems, easily and economically.


The three models differ in number and sizes of fans, but are similar in function and installation. Cool -vent I is a single -speed device, and is controlled by a temperature -activated switch that switches on at 91 degrees (F). Cool -vent II and III are 2 -speed devices that turn on at 91 degrees and switch to high speed operation at 101 degrees.

Upon receipt, the fan modules are unscrewed from the wooden grille, which is given to the cabinet supplier to finish along with the enclosure, ensuring a perfect match. At installation time, the fans are reattached to the grille and the complete assembly is mounted over the rough opening. The fans can be attached in either direction, allowing either an intake or exhaust mode of operation.










Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.