Determining the resolution of an image used to be easy. In flat panel displays you counted the number of full-color pixels composed of RGB sub-pixels. In projectors, the count of the imager elements determined resolution.

Visual Display Resolution – a New Metric based Contrast Modulation and Structural Similarity

Chris Chinnock | Insight Media

Determining the resolution of an image used to be easy.  In flat panel displays you counted the number of full-color pixels composed of RGB sub-pixels.  In projectors, the count of the imager elements determined resolution.  

Well times have changed.  In flat panels, architectures are now common that use sub-pixel rendering algorithms to display color pixels from red, green, blue and white sub-pixel elements.  In the projection world, image shifting optics now allow the rapid display of two slightly displaced but complementary images that together increase the perceived resolution beyond that one would think possible based on the imagers in the projector.

These techniques have mainly been developed as cost saving scheme but they can also sacrifice high spatial frequencies resulting in a visual loss of fidelity on letters and detailed images.  Figure 1 shows a conventional RGB stripe architecture on the left while on the right is an RGB architecture where the sub-pixels are not aligned vertically.  This architecture may not have much impact on video content compared to the RGB stripe version, but it can impact fidelity on static images.

Figure 1: Sub-pixel rendering can reduce image fidelity (display B)

New methods to measure resolution are needed.  Recently, Samsung proposed a method that builds on existing contrast modulation methods and leverages the concepts of Structural SIMilarity (SSIM) to evaluate the resolution of flat panel displays.  SSIM is a common metric used in the video and movie encoding industries to test and compare different compression schemes.  As far as we know, this is the first time it have been applied to try to determine the resolution of a display.


What is Contrast Modulation?

To understand why elements of SSIM have value, we first need a little background to understand how the measurement of resolution has evolved to date.  One of the key measurement techniques is contrast modulation.  The use of contrast modulation (Michelson contrast) to determine resolution has been used for CRT displays for a long time.  To measure contrast modulation, a series of vertical or horizontal lines are written to the display.  Contrast modulation, Cm, is calculated as follows:

Where Lw is the peak luminance of the white (or colored) peak and Lk is the luminance of the trough between the peaks.  

If the spacing between the lines is relatively large, a clear separation between the bright and dark lines will be evident and the contrast modulation will approach unity.  As the separation between the lines decreases, typically to single-pixel-wide line pairs, the display may struggle to show a clean separation of the bright and dark lines, so Cm will fall.  If the contrast modulation is too low, it is hard to see any separation – i.e. to distinguish two separate pixels.  

In the CRT days, a Cm value of 0.5 was generally considered to be the threshold for the determination of the resolution of the CRT display.  This concept has been applied to flat panel displays, although there is some disagreement among metrology professionals as to what value of Cm should be used to determine resolution.  Resolution in the horizontal or vertical direction is determined by counting the distinguishable peaks (i.e. above a certain Cm threshold).

Contrast modulation works well in conventional RGB flat panel architectures.  That is, one color pixel that is composed of red, green and blue sub-pixels that are arranged horizontally in neat and aligned rows and columns.  Resolution in these displays can simply measured by counting the RGB sub-pixels horizontally and vertically.  But applying the contrast modulation scheme works quite well too.

Read the full white paper here.
The content & opinions in this article are the author’s and do not necessarily represent the views of HomeToys

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.