These innovative wallplates easily mount into the wall with a simple, one-step process that’s up to 20% faster than traditional wallplates.

How to Install a Wallplate 20% Faster

Contributed by | Leviton

You've cut an opening in the drywall, run your cables in, and terminated the connectors. Now comes a tedious task: installing the wallplate.

But it can be the quickest and easiest step in your cable installation process if you use Leviton's QuickPlate® Tempo wallplates. These innovative wallplates easily mount into the wall with a simple, one-step process that’s up to 20% faster than traditional wallplates.

Plus, QuickPlate Tempo wallplates feature patented rear wings that automatically secure the wallplate firmly to the wall when you tighten the screws, mounting it flush to the wall and eliminating the need for a mud ring, box eliminator, or mounting bracket.

 

One Step, 20% Faster

Fast Wallplate installation

Step 1: After snapping your connectors into the back of the QuickPlate Tempo wallplate, insert the wallplate into the drywall with the rear wings closed in toward the center of the wallplate and tighten the screws in the front, causing the rear wings to secure the wallplate to the wall.

Fast Wallplate installation

And you're done! It's really that fast and easy. Check out this step-by-step how-to video for a look at the preparation process, including how to measure and cut your drywall, and a complete list of tools you'll need.

 

You can find QuickPlate Tempo wallplates with the colors and port-capacities that are just right for your project at Leviton.com/Tempo.

The content & opinions in this article are the author’s and do not necessarily represent the views of HomeToys

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries for renewable energy storage are manufactured in the USA by Concorde Battery Corporation and are built to the same demanding standards crucial to supporting the aircraft industry. To facilitate maximum conductivity & charge acceptance Sun Xtender® batteries are constructed with copper alloy corrosion free terminals & robust intercell connections. Endurance and optimal float life are achieved through plates thicker than the industry standard. Sun Xtender® Batteries' AGM maintenance free design is an ideal solution for off grid and grid tied systems.