These test results find that that higher contrast and color accuracy can produce an image that is preferred by those surveyed.

What’s More Important: Color Accuracy and Contrast or Brightness in Conference Room Presentations?

Contributed by | Insight Media & Benq

Historically, the projection industry has focused on offering more and more lumens. But is this the right metric to be focused on? Maybe end users, integrators and manufacturers should focus more on the color accuracy and contrast of the projector instead of assuming that more brightness is always better. This is the question that this white paper asks. But the purpose is not to provide a definitive answer to the question, but rather, to lay out some facts and hypothesis and start an industry dialog.

This is actually a pretty important question as display makers – both flat panel and projection - need to understand what direction their products should evolve in: higher brightness or higher contract and accurate colors. This question is perhaps most relevant to projector makers, so we will focus the discussion on that platform, although the points should apply to flat panel displays as well.

The impetus for this dialog was the release of the BenQ Colorific HC1200, a projector that is optimized for color accuracy and high contrast, rather than traditional brightness measurements. The specs on this projector indicate that it can display 100% of the sRBG color gamut, offers 2800 ANSI lumens, a traditional ANSI checkerboard contrast rating of 510:1 and an on/off contrast ratio of 11,000:1. For a conference room application, is the HC1200 “better” than other popular projectors with 4,000 lumens, but with less contrast and a non standard color gamut? It is the trade offs of color, lumens, color accuracy and contrast that we are interested in exploring – not necessarily which projector to buy. That comes after one understands the trade- offs.

At the end of the paper, we will profile one set of tests done that represent one case study for a conference room set up. We encourage others to do additional studies. To explore the issues, we start with background discussion on color performance, contrast and brightness, before discussing the test results.

Color Performance

Color performance refers to both the range of colors a display can produce as well as the accuracy in portraying specific colors. Color science is a complex topic and we don’t want to get bogged down in deep scientific explanation, so we will try to simplify the discussion somewhat – offering apologies to the color scientists reading this.

The place to start is the content creation process, and the easiest example is around a traditional home theater application. In the creation of Hollywood movies for example, a colorist is engaged to modify the colors of the movie or TV show to fit a certain style or look. The colors may not be accurate and may be muted or vibrant for artistic reasons. But, the colorist’s pallet is limited to a range of colors contained with the color standard for HDTV (Rec. 709). And if the display can portray this color range correctly, it will faithfully reproduce these colors, delivering the “director’s intent.”

In commercial and education settings, there are a number of other color critical needs that need to be considered. Many presentations utilize or replicate images that need to have colors that match the real world. Advertising agencies, clothing manufacturers, and hair color companies are obvious examples of the need to have color accurate displays in a presentation. Human flesh tones are perhaps the most critical to reproduce accurately, but even common items like the tint of a blue jean or the color of a model’s hair are sensitive items that require accurate colors. If these colors are not reproduced faithfully by the display, it will be noticed.

In a conference room application, it would not be unusual for animated content or computer generated graphics to have specific colors that may not have a natural world counterpart, but one the artist has selected for a specific effect as well. Whether the artist uses static artwork or an embedded video to be played within a PowerPoint slides, the impact of color can be crucial in a decision making environment. Additionally, colors are often important to the corporate personality of the audience. Items such as embedded logos in a PowerPoint slide need to faithfully reproduce the right colors no matter how difficult they may be to reproduce on a projector or else it can distract the audience during the entire presentation. For example, if the presentation is for Coca-Cola, you better be sure that the red is the right color in both the logos and videos or the client will not be happy. And, if a person’s face looks ashen or green, or the color of the fabric you are about to order is not faithfully reproduced, no one will be happy. People are very sensitive to accurate colors – especially colors they are closely familiar with.

Color Standards

A number of color standards have been developed to help ensure that the colors created in production can be reproduced on the display. These include standards like Rec. 709, sRGB, Adobe RGB, DCI-P3 and 2020. Below is an overview of how color space and the various color standards in the industry apply to a typical conference room projector.

What is a Color Space?

There are several ways to represent the color space of all visible colors. Probably the most familiar is the 1931 CIE Chromaticity diagram shown below. The horseshoe shaped area represents all the colors that the human eye can see. Interestingly, nature does not create colors to fill this horseshoe, but can be represented by an irregularly shaped circle (surface colors) in Figure 1.


Figure 1: Surface Colors within the 1931 CIE Chromaticity Diagram

sRGB and Rec 709 color spaces

The sRGB color space is the primary standard used in the majority of input devices, such as cameras and scanners, as well as the majority of display devices, such as computer monitors, printers, and smartphones. The sRBG color space uses the RGB primaries (end points of the triangle), with a specific gamma curve. The gamma is what sets the steps between gray levels. Most internet content is rendered using the sRGB color space.

The HDTV specification for video content is represented by Rec. 709. This is typically referenced in televisions and home theater projectors, and uses the same RGB primaries as sRGB but a different gamma curve. In other words, a sRGB/Rec. 709 comparison of series of red blocks with increasing levels of brightness will show many identical levels, with only some slight difference in the darker regions

DCI, Rec. 2020, and Adobe RGB Color Spaces

The DCI (P3) color space is used in digital cinema, while the Rec. 2020 standard is the new color space for Ultra-High Definition TVs. This is the largest color space and does the best job of showing all of the colors available in nature, plus many additional colors (neon lights, LED lights, computer generated colors, etc.). Figure 2 shows how three color standards are overlaid on the horseshoe of visible colors.


Figure 2: Various Color Standards on the 1931 CIE Chromaticity Diagram

Figure 3 shows the sRGB color space along with the Adobe RGB color space, which is popular with graphic artists. It also shows the location of a certain color, in this case, Pantone 17-5641. If you are trying to display this color on a typical sRGB standard computer monitor, you won’t display it properly. Only a display designed for an Adobe RGB or DCI-P3 color space can display it properly, and are usually significantly more expensive than a standard business display using sRGB.


Figure 3: Displaying a Specific Color in the 1931 CIE Diagram

For conference room applications, what color spaces are important? For the majority of commercial and education projector application, the sRGB color space is the standard used with monitors, printers and on the Internet. Having this standard allows a digital photo taken in sRGB mode to be displayed on the Internet to be viewed on a monitor and show accurate colors (using the sRGB mode of the monitor) and then to print those same colors (on a calibrated sRGB printer). If a projector is used as the display, it needs to also produce accurate sRGB colors so what you see is what you get (like ordering a sweater and not being shocked at the color when it arrives). If you are going to show movies, advertisements, or videos, then Rec. 709 is needed to replicate the specific color detail the director intended

The DCI-P3 color space is used only for theatrical cinema production, so is not relevant for this market. Adobe RGB may be relevant for applications in the printing industry. It was designed to encompass all the colors achievable in CMYK color printers, but using the RGB color primaries of the display to represent these colors. The Rec. 2020 color space is coming for UHD-TV, but there is no content currently available in this color space.

Common Causes of Incorrect Colors on a Display

As a general rule, content should be mastered to a specific color standard, and this standard should be best matched to the display where it is intended to be shown on. For example, TV content will be shown on a TV or tablet, so the colorist needs to render all of his colors within the Rec. 709 color space so they can be reproduced properly on a TV. That is how it is supposed to work.

But a couple of things can go wrong. First, the display may not have the capacity to properly display colors in a particular color gamut. In addition, the display that may have originally supported the color space could be have shifted and need to be recalibrated, or have aging issues that may limit its ability to display colors accurately as it did when new.

Furthermore, the display itself may not be set to the right color standard for the incoming content. For example, if the content was mastered in Adobe RGB but the display is set to sRGB mode, it will not display the correct colors – even if the display is calibrated for accurate sRGB colors. If the display can support the incoming color space, it can be switched to that gamut. If it cannot, then a transformation from the incoming color space to the display color space must be performed. The accuracy of this will depend upon the manufacturer and is not ideal for the display of color accurate information.

White Point

The white point of the display is that combination of red, green and blue light that creates white light. But white light has a “color temperature”. Movie content is typically graded and should be displayed using a D65 white point. This means the apparent blackbody equivalent of that point is a white light source at 6500 degrees Kelvin.

Some displays are tuned to high white points like 9, 10 or even 11,000 degrees Kelvin. These displays will appear distinctly bluish in their white point. Sometimes this may be preferred when showing text or PowerPoint slides with a bright white background. However, most color standards, like the ones above, call for a D65 white point.

Download and read the rest of this white paper including the following topics

How Contrast can Play a Part in Effective Conference Room Decisions

Brightness – Real and Perceived

Color Accurate, High Contrast Displays Have a Brightness Enhancing Effect Too

Summary

The impact on color in presentations has been well documented by the University of Minnesota (and others 2 2 The Importance of Color in Business Presentations ), and the new system contrast specifications highlight the role of contrast in the corporate decision making process. The new BenQ projector is a unique product that is focused around the paradigm of color accuracy and higher native contrast, but at the cost of lower specified lumen rating. Yet despite the lower lumen specifications, the projector was perceived as bright as a top selling model with brightness specifications that were 50% higher and also perceived as more color accurate than a top selling model when setup to the industry standard sRGB color space that is used in virtually every other monitor, printer, or smartphone output device typically deployed in a corporate environment.

Given the affordable nature of this new projector (with a street price under $1500), can the ability to deploy high contrast color accurate projectors into conference room and education areas where there is high ambient light impact effective decision making and improve the effectiveness of the projector system environment? We call on industry to continue additional tests to validate these results and help focus developers on those aspects of image quality that have true meaning to the end user.

This white paper was developed with support from Benq,

Download a copy of this white paper here.

Insight Media

Insight Media is a team of world-class industry experts who can offer a range of services to clients in the cinema, broadcast, ProAV, consumer electronics and display industries.  Our team is composed of very experienced industry veterans with strong technical, business and marketing experience.  This expertise spans from materials and component, to finished products and out into the professional sales and install community. 


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

VMP’s new ERVR Series of Vertical Equipment

VMP's new ERVR Series of Vertical Equipment

VMP's new ERVR Series of Vertical Equipment Racks are available in 1U, 2U, and 4U configurations, and are now shipping. For installation applications that lack the space for conventional floor or wall cabinets, such as in smaller security IT rooms and offices, this innovative compact solution provides plenty of versatility. The series accommodates rack equipment of any depth; equipment can be wall mounted vertically or under a desk horizontally; standard 10-32 threading; fold out design reduces packaging and shipping; steel construction; load capacity - 150 lbs.; black finish; ER-VR4U: 4U; ER-VR2U: 2U; ER-VR1U: 1U The versatile ERVR series gives you a flexible, reliable and affordable solution for all of your limited space installations requiring up to a 150 lb. weight capacity. Simple in design but rugged in construction, it's tough enough for even your most challenging applications.