The UK Just Switched on Its Future Smart Home Power Grid

Mike Brown for Inverse:  The world’s first data transmission over a power grid has been successfully completed, paving the way for a decentralized future where smart houses tell each other how much energy they need. The tests, conducted by Reactive Technologies in the UK, sends data along the 50Hz electricity signal that passes through sub-station transformers that link up the country’s grid. The wires themselves have been used to send data before, but it’s getting through those transformers that’s never been done.

“We are keen to support innovative products like this one that can bring a real benefit for customers,” Cordi O’Hara, director of systems operator at National Grid, told The Guardian on Tuesday. “It represents another step forward in the development of the smart grid technologies that are going to play an increasingly important role in the energy systems of the future.”  Cont'd...

 

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Comelit - VIP Kit With Planux Monitor With WIFI/3G/4G Remote APP - 8512IM

Comelit - VIP Kit With Planux Monitor With WIFI/3G/4G Remote APP - 8512IM

The kit allows use of the video entry phone system via a door entry monitor as well as tablets and smartphones on the Wi-Fi network, or remotely on 3G (or higher) networks. The gateway in the pack allows connection of other devices (Comelit VIP door entry monitors or PCs) besides the door entry monitor supplied. In all cases, the gateway should be connected to an ASDL router or another device guaranteeing local Wi-Fi and mobile 3G connectivity. Depending on bandwidth limitations, the gateway can serve up to 15 appliances (including door entry monitors, smartphones, tablets and PCs) with 4 simultaneous door entry monitor streams. It also allows "intercom" communication between all of the 16 devices served. For mobile devices, whenever both modes are available and enabled, the app automatically switches. .