Bluetooth Gateway Smart Starter Kit navigates home automation

Alun Williams for ElectronicsWeekly.com:  Low-power Bluetooth comms are a well-established known entity, but with the increasingly prevalence of all things IoT, are you aware of how to interface them to the Internet, Web and Clouds? It can be done in various ways and the Bluetooth SIG is aiming to simplify or clarify the path with itsGateway Smart Starter Kit.

This is the boast:  This kit shows you how to move data from all of your Bluetooth sensors into the cloud without a mobile device while giving you the ability to control all of them from one place.

The guide shows how to connect Bluetooth devices or sensors to the web using Bluetooth GAP/GATT RESTful APIs, using a Bluetooth gateway on a Raspberry Pi board. Further, it shows how to communicate and control these devices from the Web.  Cont'd...

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.