Study Finds Little Difference Between Active, Passive 3DTV Glasses

A new study by TCO Development found little difference between 3DTVs that use active shutter or passive glasses, at least when it comes to the visual experience. "As a certification body with a long history in the field of visual ergonomics for displays, it is important for TCO Development to evaluate the visual ergonomics of these new technologies and to assess any possible impacts on the user experience. TCO Development will further investigate the need of a TCO Certification for 3D," said Niclas Rydell, product and certification director at TCO Development. Cross-talk, or ghosting, was low for both types of glasses, though proper height and distance placement was more important for a set using passive glasses. White luminance was three times lower for active shutter glass sets compared with passive sets. And the lower resolution available for a passive 3DTV (1920-by-540 vs. 1920-by-1080 for active shutter) is noticeable, but not too much of a drawback, the study concluded.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection