Philip's Living Colors Wallpaper Replacement

Philip's is releasing its second generation Living Colors color changing LED lamp. The latest LivingColors lamp produces 16 million colors through a combination of 7 LEDs—an overall quality of light that's 50% brighter than version one. By using the touch-sensitive color wheel and intuitive remote control, you can increase and decrease the color saturation, brighten or dim the light, and turn on and off the lamp and color loop feature. Also, the remote control will remember the last setting used and automatically returns to that setting when the lamp is turned back on. Because the LivingColors remote is controlled by radio frequency, you can change the color effect from anywhere in the room without pointing the remote directly at the lamp. You can also connect up to six LivingColors lamps to the same remote control. The second generation Living Colors lamp isn't available yet but the first generation lamp and its mini counterpart are available now on Amazon here and here.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection