LED Based Rear Projection Display

Christie Projectors' new Entero line is being called the world's first LED based rear projection display systems. The Entero line is designed for control room displays and video wall applications and features DLP display technology, 600 ANSI lumens, and a 1700:1 contrast ratio. By using new LED technology, the Entero line has a life span of more than 50000 hours, which estimates to over five years of dependable 24/7 performance. The two models that are currently in the Entero series are the RPMWU-LED01 and the RPMSP-LED01. The RPMWU features WUXGA (1920 x 1200) resolution, while the RPMSP features SXGA+ (1400 x 1050) resolution. Original press release from AboutProjectors.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.