Daily News Briefs
Anthem Statement M1 Amplifier Redefines Class D Category
Visit http://www.anthemav.com for further information
The one kilowatt, single rack unit Class D mono power amplifier outperforms its class with sophisticated monitoring circuits that maintain proper frequency response, even when powering the heaviest speaker loads using a 120V line.
Submitted on 11/14/11, 01:28 PM
Toronto, ON - November 14, 2011 - Anthem, the leading manufacturer of high -end electronics for music, home theater and distributed audio systems, is now shipping the Anthem Statement M1. Anthem's game -changing monaural powerhouse annihilates conventional audiophile wisdom about Class D amplification with flawless fidelity and full dynamic range across all volume levels, flat frequency response and rock -solid stability into even the most difficult loads, no "dead time" crossover distortion, and virtually no noise floor.
What's more, the M1 makes such radical improvements over previous Class D amplifier designs while still maintaining all of the benefits that Class D design brings to the table. Class D architecture provides tremendous value over traditional Class A and Class AB designs because of its efficient output and smaller form factor, both of which the M1 perfectly embodies. Its heat pipe cooling system and deep side -mounted heat sinks allow multiple M1s, with feet removed, to be rack -mounted directly on one another, each occupying only a single rack unit. Its fanless design also makes the M1 as well -suited for the quietest of listening rooms as it is the most crowded equipment closets.
"The Anthem design team conceptualized the M1 almost 10 years ago, illustrating just how much in -house design and engineering went into producing this amplifier," said Mark Aling, director of marketing for Anthem. "More than just a slim, technologically advanced monaural, the M1 demonstrates that Class D architecture isn't fundamentally flawed, it merely hasn't been implemented well in the past, mainly because it required such a heavy commitment to R&D. We're fortunate to have the resources necessary to create such a groundbreaking product and strongly believe our customers will appreciate the effort."
Don't be confused by the "D" in "Class D" -the Statement M1 is not a digital amplifier. It boasts all the warmth and clarity of a traditional amp, in addition to a temporal resolution more than 80 times that of the audiophile -favorite SACD format, and does so with an astounding amount of power. While Anthem's own award -winning Statement P5, for example, outputs 500 watts with a 4 -ohm load, the M1 delivers 2,000 watts to the same speaker, with total harmonic distortion remaining under 0.1% from 20 Hz to 20 kHz. (Into 8 ohms, it delivers 1000 watts with a less than 0.06% total harmonic distortion.) And frequency response is load -independent, so the difference in response between a 2 -ohm load and an open circuit is an astounding 0.1 dB at 20 kHz. Between 4 ohms and 8 ohms there is absolutely no change in frequency response.
The Statement M1 attains this level of power, performance, and consistency through the employment of a few key technologies, including a proprietary load monitoring system that relies on a Digital Signal Processor -outside the signal path! -to monitor line voltage, output current, ground fault detection, temperature, and DC voltage at the output to ensure the highest possible output from either a 120V or 240V circuit. Power Factor Correction maximizes available power by marrying the voltage and current cycles, enabling continuous output from the power supply through the entire AC cycle without contaminating the AC line with noise.
While all of this innovation adds up to an amplifier that is admittedly not inexpensive, the Anthem Statement M1 nonetheless represents an unparalleled value in terms of price versus performance, with ample headroom to drive even the most power -hungry speakers, and the utmost in clarity and focus demanded by the most discerning listeners.
The Anthem Statement M1 is shipping now, with a US MRSP of $3499. More information on Anthem can be found at www.anthemAV.com.
Anthem, part of Paradigm Electronics Inc., is a leading manufacturer of award -winning high -end electronics for music, home theater and distributed sound systems sold internationally under the brand names Anthem® and Anthem® Statement. Products are used at all levels of music reproduction and allow you to virtually "be there" every time you listen to a favorite piece of recorded music or experience the excitement of surround -sound home theater. Headquarters are in Mississauga, Ontario, Canada.
Anthem and Anthem Statement are trademarks of Anthem/Sonic Frontiers International, copyright Paradigm Electronics Inc. All rights reserved.