KH2000 HDMI+USB+Audio Matrix Extender over IP/Fiber KH2000 is the KVM over IP extends HDMI,VGA, USB, 2-way analog audio, RS-232, and bi-directional IR over a Gigabit Local Area Network or Fiber Optic.

The Sender and Receiver units can be automatically or manually configured to unique IP addresses to allow the connection of multiple Senders and Receivers to the same network. Multiple Receiver units can simultaneously connect to any Sender unit within the network to create a virtual cross-point matrix of up to 16 Senders and multiple Receivers .

Features:

1.Extends HDMI,VGA, USB, RS-232, bi-directional stereo analog audio, and bi-directional IR over IP / SFP
2.Matrix switching extension over IP.
3.Supports resolutions up to 1080P.
4.Supports video wall matrix extension over IP.
5.USB 2.0 and backward-compatibility with USB 1.1
6.HDMI (non-HDCP protected ) into VGA out .
7.Web UI shows the connection status included all of Tx and Rx.
8.Supports multi-consoles to max 255 PCs ( multi-console KVM Extender ) .
9.Field-upgradable firmware via web server interface
10.Support HDR pass through .
11.Supports just over 65,000 Receivers, depending on the network bandwidth and number of ports of your network switch.
12.Supports up to 16 Senders (DIP) or250 Sender( Command mode )
13.Extend by CatX or Fiber
14.PoE supported ( Optional ).
15.Made in Taiwan.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.