miniDSP Releases the PWR16 - A Flexible Multichannel Audio Amplifier

The PWR-16 features up to 16 channels of audio amplification by ICEpower® in eight zones. Each amplification channel can deliver peak power of 80W into a 4 ohm speaker.

Fitting 16channels of audio amplification into 1 rack unit. Sounds crazy? Yet it's the technical feat the PWR-16 can achieve thanks to IcePower compact ClassD modules.


The miniDSP PWR-16 is a 400 Watt ultra-compact, highly-efficient audio power amplifier intended for multizone custom installations in modern homes, multi rooms, hotels, restaurants, bars, theatres, auditoriums, amusement parks, shopping malls etc. This amplifier is one of the lightest and most compact of its kind and excels with its impressive power-to-size ratio and its incredible power efficiency.

The PWR-16 features 16 channels of amplification by ICEpower® in eight zones. Each amplification channel can deliver peak power of 80W into a 4 ohm speaker. The two channels in a zone can be switched to BTL (bridge-tied load) mode to deliver peak power of 160W into an 8 ohm speaker. The result is an extremely flexible amplifier that can be used in many configurations.

A comprehensive set of control and protection features make the amplifier extremely flexible and robust. Remote enable, signal detection, and individual disabling of zones ensure minimum power consumption.

Now is now available on our webshop for 1199USD and through our dealer network immediately. Check out our product page for more info.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.